2,315
edits
Changes
→Solid Contact Rivets
Solid contact rivets are the oldest utilized contact parts. Their manufacturing requires a ductile contact material and is done without scrap on fully automated special cold heading machines. A wire slug is cut off and the rivet head is formed by pressing and hammering. This way contact rivets with various head configurations such as flat, domed, spherical or pointed can be manufactured, depending on the final application and switch or relay design.
<figure id="fig:Typical_Contact_Shapes_of_Solid_Contact_Rivets">
[[File:Ty_pical_Contact_Shapes_of_Solid_Contact_Rivets.jpg|right|thumb|Figure 1: Typical Contact Shapes of Solid Contact Rivets]]
</figure>
*Typical Contact Shapes of Solid Contact Rivets (<xr id="fig:Typical_Contact_Shapes_of_Solid_Contact_Rivets"/>)
*Contact Materials <br /> Au-, AgPd-, PdCu-Alloys, Ag, AgNi 0,15 (ARGODUR-Spezial), AgCu, AgCuNi (ARGODUR 27), Ag/Ni (SINIDUR), Ag/CdO (DODURIT CdO), Ag/SnO<sub>2</sub> SISTADOX), Ag/ZnO (DODURIT ZnO),Ag/C 97/3*, Cu<br /> <span class="small"><sup>*</sup> dimensionally very limited</span>
*Dimensional Ranges (<xr id="fig:Dimensional_Ranges"/> ) <br /> The respective parameters cannot be chosen independently of each other. They mainly depend on the ductility of the required contact material. Before a final decision on the dimensions we recommend to consult with the contact manufacturer. <br />
<figure id="fig:Dimensional_Ranges">
[[File:Dimensional Ranges.jpg|right|thumb|Figure 2: Dimensional Ranges]]
</figure>
*Qualitätsmerkmale und Toleranzen (<xr id="fig:Qualitaetsmerkmale_und_Toleranzen"/>)
<figure id="fig:Qualitaetsmerkmale_und_Toleranzen">
[[File:Qualitaetsmerkmale und Toleranzen.jpg|left|thumb|Figure 3: Qualitaetsmerkmale und Toleranzen]]
</figure>
