2,315
edits
Changes
→Destructive Testing
*Saw-Cutting <br />A crossing pattern is cut with a fine saw into the contact tip. Areas that are not bonded fall off in pieces.<br />
*Metallographic Micro-section <br />In a metallographic micro-section perpendicular to the contact surface wetting defects can also be made visible (<xr id="fig:CdO tip on Cu carrier"/><!--(Fig. 3.14)--> ) which however are only indicative of the brazing temperature and brazing time.<br />
<figure id="fig:CdO tip on Cu carrier">
[[File:CdO tip on Cu carrier.jpg|right|thumb|Figure 1: Mechanical Braze joint with voids. Ag/CdO tip on Cu carrier.]]
</figure>
