210
edits
Changes
Created page with "===<!--6.4.4-->Schaltende Kontakte=== <ul> <li>'''Effekte bei Schaltvorgängen'''</li> <xr id="fig:Contact_opening_with_arc_formation_schematic"/><!--Fig. 6.7:--> Kontaktöff..."
===<!--6.4.4-->Schaltende Kontakte===
<ul>
<li>'''Effekte bei Schaltvorgängen'''</li>
<xr id="fig:Contact_opening_with_arc_formation_schematic"/><!--Fig. 6.7:--> Kontaktöffnung unter Lichtbogenbildung (schematisch)
<div class="multiple-images">
<figure id="fig:Contact_opening_with_arc_formation_schematic">
[[File:Contact opening with arc formation schematic.jpg|left|thumb|<caption>Kontaktöffnung unter Lichtbogenbildung (schematisch)</caption>]]
</figure>
</div>
<div class="clear"></div>
<li>'''Influence of out-gasing from plastics'''</li>
<xr id="fig:Histogram_of_the_contact_resistance_Rk"/><!--Fig. 6.9:--> Histogram of the contact resistance Rk of an electroplated palladium layer (3 μm) with and without hard gold flash plating (0.2 μm) after exposure with different plastic materials
<xr id="fig:Contact resistance with exposure to out gasing from plastics"/><!--Fig. 6.10:--> Contact resistance with exposure to out gasing from plastics as a function of numbers of operations at 6 V<sub>DC</sub>,100 mA: 1 Silicon containing plastic; 2 Plastics with strongly out-gasing components; 3 Plastics with minimal out-gasing components
<div class="multiple-images">
<figure id="fig:Histogram_of_the_contact_resistance_Rk">
[[File:Histogram of the contact resistance Rk.jpg|left|thumb|<caption>Histogram of the contact resistance R<sub>K</sub> of an electroplated palladium layer (3 μm) with and without hard gold flash plating (0.2 μm) after exposure with different plastic materials</caption>]]
</figure>
<figure id="fig:Contact resistance with exposure to out gasing from plastics">
[[File:Contact resistance with exposure to out gasing from plastics.jpg|left|thumb|<caption>Contact resistance with exposure to out-gasing from plastics as a function of numbers of operations at 6 V<sub>DC</sub>,100 mA: 1 Silicon containing plastic; 2 Plastics with strongly out-gasing components; 3 Plastics with minimal out-gasing components</caption>]]
</figure>
</div>
<div class="clear"></div>
<li>'''Influence of corrosive gases on the contact resistance'''</li>
<xr id="fig:Distribution of cumulative frequency H of the contact resistance for solid contact rivets"/><!--Fig. 6.11:--> Distribution of cumulative frequency H of the contact resistance for solid contact rivets after 10 days exposure in a three-component test environment with 400 ppb each of H<sub>2</sub>S, SO<sub>2</sub> and NO<sub>2</sub> at 25°C, 75% RH; Contact force 10cN; Measuring parameters: ≤ 40 mV<sub>DC</sub>,10 mA; Probing
contact: Gold rivet
<div class="multiple-images">
<figure id="fig:Distribution of cumulative frequency H of the contact resistance for solid contact rivets">
[[File:Distribution of cumulative frequency H of the contact resistance for solid contact rivets.jpg|left|thumb|<caption>Distribution of cumulative frequency H of the contact resistance for solid contact rivets after 10 days exposure in a three-component test environment with 400 ppb each of H<sub>2</sub>S, SO<sub>2</sub> and NO<sub>2</sub> at 25°C, 75% RH; Contact force 10cN; Measuring parameters: ≤ 40 mV<sub>DC</sub>,10 mA; Probing
contact: Gold rivet</caption>]]
</figure>
</div>
<div class="clear"></div>
[[File:Influences on contact areas in relays.jpg|right|thumb|Influences on contact areas in relays]]
<li>'''Contact Phenomena under the influence of arcing Matertia'''</li>
<ul>
<li>'''Material transfer'''</li>
<xr id="fig:Material transfer under DC load"/><!--Fig. 6.12:--> Material transfer under DC load a) Cathode; b) Anode. <br /> Material: AgNi0.15; Switching parameters: 12V<sub>DC</sub>, 3 A, 2x10<sup>6</sup> operations
<div class="multiple-images"><figure id="fig:Material transfer under DC load">[[File:Material transfer under DC load.jpg|left|thumb|<caption>Material transfer under DC load a) Cathode; b) Anode. <br /> Material: AgNi0.15; Switching parameters: 12V<sub>DC</sub>, 3 A, 2x10<sup>6</sup> perations</caption>]]</figure></div>
<div class="clear"></div>
<li>'''Arc erosion'''</li>
<xr id="fig:Arc erosion of a AgSnO2 contact pair after extreme arcing conditions"/><!--Fig. 6.13:--> Arc erosion of a Ag/SnO<sub>2</sub> contact pair after extreme arcing conditions a) Overall view; b) Partial detail view
<div class="multiple-images"><figure id="fig:Arc erosion of a AgSnO2 contact pair after extreme arcing conditions">[[File:Arc erosion of a AgSnO2 contact pair after extreme arcing conditions.jpg|left|thumb|<caption>Arc erosion of a Ag/SnO<sub>2</sub> contact pair after extreme arcing conditions a) Overall view; b) Partial detail view</caption>]]</figure></div>
<div class="clear"></div>
<li>'''Contact welding'''</li>
<xr id="fig:Micro structure of a welded contact pair after extremely high current load"/><!--Fig. 6.14:--> Micro structure of a welded contact pair (Ag/SnO<sub>2</sub>88/12 - Ag/CdO88/12) after extremely high current load. a) Ag/SnO<sub>2</sub>88/12; b) Ag/CdO88/12
<div class="multiple-images">
<figure id="fig:Micro structure of a welded contact pair after extremely high current load">
[[File:Micro structure of a welded contact pair after extremely high current load.jpg|left|thumb|<caption>Micro structure of a welded contact pair (Ag/SnO<sub>2</sub>88/12 - Ag/CdO88/12) after extremely high current load. a) Ag/SnO<sub>2</sub>88/12; b) Ag/CdO88/12</caption>]]
</figure>
</div>
<div class="clear"></div>
</ul>
</ul>
==References==
[[Application Tables and Guideline Data for Use of Electrical Contact Design#References|References]]
[[en:Switching_Contacts]]
<ul>
<li>'''Effekte bei Schaltvorgängen'''</li>
<xr id="fig:Contact_opening_with_arc_formation_schematic"/><!--Fig. 6.7:--> Kontaktöffnung unter Lichtbogenbildung (schematisch)
<div class="multiple-images">
<figure id="fig:Contact_opening_with_arc_formation_schematic">
[[File:Contact opening with arc formation schematic.jpg|left|thumb|<caption>Kontaktöffnung unter Lichtbogenbildung (schematisch)</caption>]]
</figure>
</div>
<div class="clear"></div>
<li>'''Influence of out-gasing from plastics'''</li>
<xr id="fig:Histogram_of_the_contact_resistance_Rk"/><!--Fig. 6.9:--> Histogram of the contact resistance Rk of an electroplated palladium layer (3 μm) with and without hard gold flash plating (0.2 μm) after exposure with different plastic materials
<xr id="fig:Contact resistance with exposure to out gasing from plastics"/><!--Fig. 6.10:--> Contact resistance with exposure to out gasing from plastics as a function of numbers of operations at 6 V<sub>DC</sub>,100 mA: 1 Silicon containing plastic; 2 Plastics with strongly out-gasing components; 3 Plastics with minimal out-gasing components
<div class="multiple-images">
<figure id="fig:Histogram_of_the_contact_resistance_Rk">
[[File:Histogram of the contact resistance Rk.jpg|left|thumb|<caption>Histogram of the contact resistance R<sub>K</sub> of an electroplated palladium layer (3 μm) with and without hard gold flash plating (0.2 μm) after exposure with different plastic materials</caption>]]
</figure>
<figure id="fig:Contact resistance with exposure to out gasing from plastics">
[[File:Contact resistance with exposure to out gasing from plastics.jpg|left|thumb|<caption>Contact resistance with exposure to out-gasing from plastics as a function of numbers of operations at 6 V<sub>DC</sub>,100 mA: 1 Silicon containing plastic; 2 Plastics with strongly out-gasing components; 3 Plastics with minimal out-gasing components</caption>]]
</figure>
</div>
<div class="clear"></div>
<li>'''Influence of corrosive gases on the contact resistance'''</li>
<xr id="fig:Distribution of cumulative frequency H of the contact resistance for solid contact rivets"/><!--Fig. 6.11:--> Distribution of cumulative frequency H of the contact resistance for solid contact rivets after 10 days exposure in a three-component test environment with 400 ppb each of H<sub>2</sub>S, SO<sub>2</sub> and NO<sub>2</sub> at 25°C, 75% RH; Contact force 10cN; Measuring parameters: ≤ 40 mV<sub>DC</sub>,10 mA; Probing
contact: Gold rivet
<div class="multiple-images">
<figure id="fig:Distribution of cumulative frequency H of the contact resistance for solid contact rivets">
[[File:Distribution of cumulative frequency H of the contact resistance for solid contact rivets.jpg|left|thumb|<caption>Distribution of cumulative frequency H of the contact resistance for solid contact rivets after 10 days exposure in a three-component test environment with 400 ppb each of H<sub>2</sub>S, SO<sub>2</sub> and NO<sub>2</sub> at 25°C, 75% RH; Contact force 10cN; Measuring parameters: ≤ 40 mV<sub>DC</sub>,10 mA; Probing
contact: Gold rivet</caption>]]
</figure>
</div>
<div class="clear"></div>
[[File:Influences on contact areas in relays.jpg|right|thumb|Influences on contact areas in relays]]
<li>'''Contact Phenomena under the influence of arcing Matertia'''</li>
<ul>
<li>'''Material transfer'''</li>
<xr id="fig:Material transfer under DC load"/><!--Fig. 6.12:--> Material transfer under DC load a) Cathode; b) Anode. <br /> Material: AgNi0.15; Switching parameters: 12V<sub>DC</sub>, 3 A, 2x10<sup>6</sup> operations
<div class="multiple-images"><figure id="fig:Material transfer under DC load">[[File:Material transfer under DC load.jpg|left|thumb|<caption>Material transfer under DC load a) Cathode; b) Anode. <br /> Material: AgNi0.15; Switching parameters: 12V<sub>DC</sub>, 3 A, 2x10<sup>6</sup> perations</caption>]]</figure></div>
<div class="clear"></div>
<li>'''Arc erosion'''</li>
<xr id="fig:Arc erosion of a AgSnO2 contact pair after extreme arcing conditions"/><!--Fig. 6.13:--> Arc erosion of a Ag/SnO<sub>2</sub> contact pair after extreme arcing conditions a) Overall view; b) Partial detail view
<div class="multiple-images"><figure id="fig:Arc erosion of a AgSnO2 contact pair after extreme arcing conditions">[[File:Arc erosion of a AgSnO2 contact pair after extreme arcing conditions.jpg|left|thumb|<caption>Arc erosion of a Ag/SnO<sub>2</sub> contact pair after extreme arcing conditions a) Overall view; b) Partial detail view</caption>]]</figure></div>
<div class="clear"></div>
<li>'''Contact welding'''</li>
<xr id="fig:Micro structure of a welded contact pair after extremely high current load"/><!--Fig. 6.14:--> Micro structure of a welded contact pair (Ag/SnO<sub>2</sub>88/12 - Ag/CdO88/12) after extremely high current load. a) Ag/SnO<sub>2</sub>88/12; b) Ag/CdO88/12
<div class="multiple-images">
<figure id="fig:Micro structure of a welded contact pair after extremely high current load">
[[File:Micro structure of a welded contact pair after extremely high current load.jpg|left|thumb|<caption>Micro structure of a welded contact pair (Ag/SnO<sub>2</sub>88/12 - Ag/CdO88/12) after extremely high current load. a) Ag/SnO<sub>2</sub>88/12; b) Ag/CdO88/12</caption>]]
</figure>
</div>
<div class="clear"></div>
</ul>
</ul>
==References==
[[Application Tables and Guideline Data for Use of Electrical Contact Design#References|References]]
[[en:Switching_Contacts]]
