Changes

The spring bending limit is defined as the boundary condition under which a standar-dized spring sample retains a deformation of 0.05 mm after initial bend stressing and subsequent force removal. The measurement is performed according to the standard EN 12384. The spring bending limit is strongly dependent on the direction of stressing with regard to the strip rolling orientation <xr id="fig:Direction_dependence_of_the_spring_bending limitDirection_dependence_of_the_spring_bending_limit"/> (Fig. 5.38). Higher values are obtained if bending is perpendicular to the rolling direction as compared to parallel. This has to be considered when designing contact springs.