For the electroplating of metals, especially precious metals and water based solutions (electrolytes) are used, which contain the metals to be deposited as ions (i.e. dissolved metal salts). An electric field between the anode and the work pieces as the cathode, forces the positively charged metal ions to move to the cathode where they give up their charge and deposit themselves as metal on the surface of the work piece. Depending on the application, for electric and electronic or decorative end use, different electrolytic bath soluti...
Revision as of 17:18, 27 January 2014 by Doduco Admin (talk | contribs)
Featured ArticleWelcome to our Wiki of electrical contactsThe basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form. For further questions or help, please contact us directly under Contact DODUCO
Featured Article |
Featured Files
Precipitation hardening of CuBe2 (soft) at 325°C
Pages: Precipitation Hardening Copper Alloys, Aushärtbare Kupfer-Legierungen by Doduco Redaktion
Typical application ranges for contact materials in power engineering switching devices as a function of switching current and voltage
Pages: High Electrical Loads, Hohe elektrische Last by Doduco Redaktion |