Difference between revisions of "Data Book of Electrical Contacts"

From Electrical Contacts
Jump to: navigation, search
Line 1: Line 1:
  
 
{|class="mainPage" cellpadding="0" cellspacing="10"
 
{|class="mainPage" cellpadding="0" cellspacing="10"
|<h4>Featured Article</h4>
+
|{{MainArticles}}
{{MainArticles}}
 
 
|<h4>Featured Files</h4>
 
|<h4>Featured Files</h4>
 
{{MainPicture}}
 
{{MainPicture}}

Revision as of 13:51, 16 May 2014

Welcome to our Wiki of electrical contacts

The basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form.
To get your desired information, please use:

For further questions or help, please contact us directly under Contact DODUCO


Featured Article

Low and Medium Electrical Loads

Low and Medium Electrical Loads

Switching processes at low and medium electrical loads are experienced for example in relays and switches for the measuring technology, telecommunications, automotive usage and appliances. The switching voltage, ranges from μV to 400V with currents between μA and about 100A.

Guided by empirically developed arc-limiting graphs, typical switching processes can be distinguished. As illustrates, voltage and current determine if switching occurs without arcing, if it resul...

Featured Files

Rough flat surface.jpg
Rough flat surface. a) before and b) during making contact with an ideally smooth flat surface; c) Schematic of the apparent, load bearing and effective contact areas (not to scale; dashed lines are elevation lines)
Pages: Application Tables and Guideline Data for Use of Electrical Contact Design,
Anwendungstabellen und Richtwerte für den Einsatz elektrischer Kontakte

by Doduco Redaktion


Softening of CuNi9Sn2 after annealing Wieland.jpg
Softening of CuNi9Sn2 after 1 hr annealing after 60% cold working (Wieland)
Pages: Other Naturally Hard Copper Alloys,
Sonstige naturharte Kupfer-Legierungen

by Doduco Redaktion