2,808
edits
Changes
→Weld Buttons
produced by brazing of tungsten discs to a weldable pre-formed base.
*Typical contact forms of weld buttons (s. Picture <xr id="Typical contact forms of weld buttonsfig:Typical_contact_forms_of_weld_buttons"/>)<figure id="fig:Typical_contact_forms_of_weld_buttons">
[[File:Typical_contact_forms_of_weld_buttons.jpg|right|thumb|Typical contact forms of weld buttons]]
</figure>
*Contact materials <br /> Ag, AgNi 0,15 (ARGODUR-Spezial), AgCu, AgCuNi (ARGODUR 27), Ag/Ni (SINIDUR), Ag/CdO (DODURIT CdO), Ag/SnO<sub>2</sub> (SISTADOX), Ag/ZnO (DODURIT ZnO) <br />
*Carrier materials <br />Ni, Fe, CuNi, CuNiZn et.al.<br />
*Dimensional Ranges (s. Picture <xr id="Dimensional fig:13neuDimensional -Ranges"/>)<figure id="fig:13neuDimensional -Ranges">
[[File:13neuDimensional -Ranges.jpg|right|thumb|Dimensional Ranges]]
</figure>*Quality criteria of standard weld buttons (s. Picture <xr id="Quality criteria of standard weld buttonsfig:16Quality_criteria_-of_standard_weld_-buttonsneu"/>)<figure id="fig:16Quality_criteria_-of_standard_weld_-buttonsneu">
[[File:16Quality_criteria_-of_standard_weld_-buttonsneu.jpg|right|thumb|Quality criteria of standard weld buttons]]
</figure>
[[Category:Manufacturing Technologies for Contact Parts|Category]]
==References==
[[:Manufacturing Technologies for Contact Parts#References|Manufacturing Technologies for Contact Parts]]
