Data Book of Electrical Contacts

From Electrical Contacts
Revision as of 15:18, 26 September 2014 by Teitscheid (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Welcome to our Wiki of electrical contacts

The basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form.
To get your desired information, please use:

For further questions or help, please contact us directly under Contact DODUCO


Featured Article

Naturally Hard Copper Alloys

Alloys like brasses (CuZn), tin bronzes (CuSN) and German silver (CuNiZn), for which the required hardness is achieved by cold working, are defined as naturally hard alloys. Included in this group are also the silver bronzes (CuAg) with 2 – 6 wt% of Ag.

Copper-Zinc Alloys Test (Brasses)

Copper-zinc alloys are widely used as contact carrier materials in switching devices for electrical power engineering because of their high electrical conductivity, the higher mechanical strength combined with good formability ...

Featured Files

Ultrasonic picture of a weld.jpg
Ultrasonic picture of a weld joint, Ag/C tip on Cu carrier (ABB-STOTZ-KONTAKT)
Pages: Evaluation of Braze or Weld Joints,
Prüfung von Löt- und Schweißverbindungen

by Doduco Redaktion


Electrical-Properties-of-the-Most-Important-Metals.jpg
Electrical Properties of the Most Important Metals

by Doduco Redaktion