Difference between revisions of "Data Book of Electrical Contacts"

From Electrical Contacts
Jump to: navigation, search
 
(20 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
 
{|class="mainPage" cellpadding="0" cellspacing="10"
 
{|class="mainPage" cellpadding="0" cellspacing="10"
|<h4>Featured Article</h4>
+
|{{MainArticles}}
[[Brazing Alloys and Fluxes]]<div class=right-pic> Different shapes of powders are</div><br>
 
 
 
[[Physical Properties of the Most Important Metals]]<div class=right-pic> </div><br>
 
 
|<h4>Featured Files</h4>
 
|<h4>Featured Files</h4>
[[File:SofteningOfCuETPafterAnnealing.png|left|thumb|170px]]
+
{{MainPicture}}
[[File:Strain hardering.png|left|thumb|170px]]
 
<div class=right-pic> </div>
 
 
|}
 
|}
<div class="clear">
 
==List==
 
[[Foreword]]
 
== Starthilfen ==
 
  
* [//www.mediawiki.org/wiki/Manual:Configuration_settings Liste der Konfigurationsvariablen]
+
[[de:Wiki_der_elektrischen_Kontakte]]
* [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki-FAQ]
+
 
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce Mailingliste neuer MediaWiki-Versionen]
 
* [//www.mediawiki.org/wiki/Localisation#Translation_resources Lokalisiere MediaWiki für deine Sprache]
 
 
__NOTOC__
 
__NOTOC__
 
__NOEDITSECTION__
 
__NOEDITSECTION__

Latest revision as of 16:18, 26 September 2014

Welcome to our Wiki of electrical contacts

The basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form.
To get your desired information, please use:

For further questions or help, please contact us directly under Contact DODUCO


Featured Article

Evaluation of Braze or Weld Joints

The switching properties of brazed and welded contact assemblies is strongly dependent on the quality of the joint between the contact and the carrier. The required high quality is evaluated through optical methods, continuous control of relevant process parameters and by sampling of finished products.

Brazed Joints

Despite optimized brazing parameters non-wetted defect areas in the braze joint cannot be avoided completely. These wetting defects can mostly be traced to voids caused by flux inclusions in the braze joint area. ...

Featured Files

Softening of Ag SnO2 88 12 PE after annealing.jpg
Softening of Ag/SnO2 88/12 PE after annealing for 1 hr after 40% cold working
Pages: Silver Based Materials,
Werkstoffe auf Silber-Basis

by Doduco Redaktion


Strain hardening of oxidized AgSnO2 88 12 PW4.jpg
Strain hardening of oxidized Ag/SnO2 88/12 PW4 by cold working
Pages: Silver Based Materials,
Werkstoffe auf Silber-Basis

by Doduco Redaktion