Semi-finished contact pre-materials can be manufactured from solid precious metals, precious metal alloys or precious metal containing composite materials. They are made in wire, strip and profile form by known processing technologies such as extrusion and subsequent annealing and drawing or roll-forming. They are supplied following the manufacturer's internal standards usually related to DIN EN specifications for copper based materials. The most important materials are two – or multiple material layered semi-finished materials with t...
Data Book of Electrical Contacts
From Electrical Contacts
Featured ArticleWelcome to our Wiki of electrical contactsThe basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form. For further questions or help, please contact us directly under Contact DODUCO
Featured Article |
Featured Files
.jpg) Powder metallurgical manufacturing of composite materials (schematic).jpg Powder-metallurgical manufacturing of composite materials (schematic)
T<sub>s</sub> = Melting point of the lower melting component
Pages: Contact Materials for Electrical Engineering, Kontaktwerkstoffe für die Elektrotechnik, Wiki der elektrischen Kontakte by Doduco Redaktion
 Ultrasonic picture of a weld.jpg Ultrasonic picture of a weld joint, Ag/C tip on Cu carrier (ABB-STOTZ-KONTAKT)
Pages: Evaluation of Braze or Weld Joints, Prüfung von Löt- und Schweißverbindungen by Doduco Redaktion |
Starthilfen
- Foreword
- Liste der Konfigurationsvariablen
- MediaWiki-FAQ
- Mailingliste neuer MediaWiki-Versionen
- Lokalisiere MediaWiki für deine Sprache
