The procedures and standards for testing electrical contacts described below are mostly concentrated on contact applications in electromechanical devices. Since the range of applications for electrical contacts is very broad, a complete description of all relevant test procedures would extend the scope of this chapter of the Data Book. Therefore we limited the content here to contact coatings and switching contacts for information and power engineering. Because of the ongoing miniaturization of electromechanical devices the testing fo...
Data Book of Electrical Contacts
From Electrical Contacts
Revision as of 17:18, 27 January 2014 by Doduco Admin (talk | contribs)
Featured ArticleWelcome to our Wiki of electrical contactsThe basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form. For further questions or help, please contact us directly under Contact DODUCO
Featured Article |
Featured Files
 Ultrasonic picture of a weld.jpg Ultrasonic picture of a weld joint, Ag/C tip on Cu carrier (ABB-STOTZ-KONTAKT)
Pages: Evaluation of Braze or Weld Joints, Prüfung von Löt- und Schweißverbindungen by Doduco Redaktion
 Smallest possible bend radii as a functionbend line parallel to the rolling direction.jpg Smallest possible bend radii for 90° bends as a function of the 0.2% yield strength Rp0.2 – bend line parallel to the rolling direction (Wieland)
Pages: Application Properties for the Selection of Copper Alloys, Kenngrößen zur Bewertung der Eigenschaften von Kupfer-Legierungen by Doduco Redaktion |
Starthilfen
