The procedures and standards for testing electrical contacts described below are mostly concentrated on contact applications in electromechanical devices. Since the range of applications for electrical contacts is very broad, a complete description of all relevant test procedures would extend the scope of this chapter of the Data Book. Therefore we limited the content here to contact coatings and switching contacts for information and power engineering. Because of the ongoing miniaturization of electromechanical devices the testing fo...
Revision as of 18:18, 27 January 2014 by Doduco Admin (talk | contribs)
Featured ArticleWelcome to our Wiki of electrical contactsThe basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form. For further questions or help, please contact us directly under Contact DODUCO
Featured Article |
Featured Files
 Softening of Ag SnO2 88 12 PE after annealing.jpg Softening of Ag/SnO2 88/12 PE after annealing for 1 hr after 40% cold working
Pages: Silver Based Materials, Werkstoffe auf Silber-Basis by Doduco Redaktion
 Softening of CuZn36 25.jpg Softening of CuZn36 after 3 hrs annealing after 25% cold working
Pages: Naturally Hard Copper Alloys, Naturharte Kupfer-Legierungen by Doduco Redaktion |