Semi-finished contact pre-materials can be manufactured from solid precious metals, precious metal alloys or precious metal containing composite materials. They are made in wire, strip and profile form by known processing technologies such as extrusion and subsequent annealing and drawing or roll-forming. They are supplied following the manufacturer's internal standards usually related to DIN EN specifications for copper based materials. The most important materials are two – or multiple material layered semi-finished materials with t...
Data Book of Electrical Contacts
From Electrical Contacts
Welcome to our Wiki of electrical contactsThe basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form. For further questions or help, please contact us directly under Contact DODUCO
Featured Article |
Featured Files
 Failure probability of a contact as a function of the voitage.jpg Failure probability of a contact as a function of the voltage (according to Kirchdorfer); Ag/Ni10; 10 mA
Pages: General Rules for Dimensioning of Contacts, Faustregeln für die Kontaktdimensionierung by Doduco Redaktion
 Rough flat surface.jpg Rough flat surface. a) before and b) during making contact with an ideally smooth flat surface; c) Schematic of the apparent, load bearing and effective contact areas (not to scale; dashed lines are elevation lines)
Pages: Application Tables and Guideline Data for Use of Electrical Contact Design, Anwendungstabellen und Richtwerte für den Einsatz elektrischer Kontakte by Doduco Redaktion |
