Difference between revisions of "Physikalische Effekte bei Gleit- und Steckkontakten"
From Electrical Contacts
Doduco Admin (talk | contribs) (→Physikalische Effekte bei Gleit- und Steckkontakten) |
Doduco Admin (talk | contribs) (→Physikalische Effekte bei Gleit- und Steckkontakten) |
||
(One intermediate revision by the same user not shown) | |||
Line 41: | Line 41: | ||
<div class="multiple-images"> | <div class="multiple-images"> | ||
<figure id="fig:Contact resistance Rk as a function of the contact force Fk"> | <figure id="fig:Contact resistance Rk as a function of the contact force Fk"> | ||
− | [[File:Contact resistance Rk as a function of the contact force Fk.jpg| | + | [[File:Contact resistance Rk as a function of the contact force Fk.jpg|right|thumb|Figure 1: Abhängigkeit des Kontaktwiderstandes R<sub>k</sub> von der Kontaktkraft F<sub>k</sub> für verschieden Beschichtungswerkstoffe. Gemessen mit einer kugelförmigen Goldsonde; I=10 mA, U< 20 mV]] |
</figure> | </figure> | ||
<figure id="fig:Contact resistance Rk as a function of the fretting wear cycles"> | <figure id="fig:Contact resistance Rk as a function of the fretting wear cycles"> | ||
− | [[File:Contact resistance Rk as a function of the fretting wear cycles.jpg| | + | [[File:Contact resistance Rk as a function of the fretting wear cycles.jpg|right|thumb|Figure 2: Abhängigkeit des Kontaktwiderstandes R<sub>k</sub> von der Anzahl der Reibzyklen für verschiedene Beschichtungswerkstoffe, Relativbewegung d=50μm]] |
</figure> | </figure> | ||
− | + | [[File:Coefficient of frictional wear for the wear loss of sliding contacts Silver Silver.jpg|right|thumb|Figure 3: Verschleißkoeffizient für den Abrieb an Gleitkontakten Silber/Silber und Hartgold/Hartgold | |
− | |||
− | [[File:Coefficient of frictional wear for the wear loss of sliding contacts Silver Silver.jpg| | ||
in Abhängigkeit von der Kontaktkraft]] | in Abhängigkeit von der Kontaktkraft]] | ||
− | |||
</div> | </div> | ||
<div class="clear"></div> | <div class="clear"></div> |
Revision as of 13:47, 11 January 2023
Physikalische Effekte bei Gleit- und Steckkontakten
Mechanischer Verschleiß von Gleitkontakten
dV/dx = k x FK /3 HW |
dV/dx Verschleißvolumen in mm3 pro Gleitlänge in mm |
k Verschleißkoeffizient |
HW Härte des weicheren Werkstoffes (Brinell- oder Vickerseinheiten) |
FK Kontaktkraft in cN |
Verschleißkoeffizient k bei Materialübertragung |
Silber – Silber 120 x 10-4 |
Platin – Platin 400 x 10-4 |
Silber – Platin 1.3 x 10-4 |
Verschleißkoeffizient k bei Abrieb |
Silber – Silber 8 x 10-4 |
Gold – Gold 9 x 10-4 |
Platin – Platin 40 x 10-4 |
Silber – Gold 9 x 10-4 |
Silber – Platin 5 x 10-4 |
Kontaktverhalten von Steckkontakten
Table 1: Beschichtungswerkstoffe für Steckverbinder
Herstellungsverfahren | Schichtwerkstoffe | Zwischenschicht | Härte HV | Reibwert |
---|---|---|---|---|
Galvanische Beschichtung | Zinn Nickel Nickel-phosphorus (NiP 6 - 15) Silver Hartgold (< 0,3 Massen-% Ni oder Co) Palladium mit Goldflash (<0,2μm) Palladium - Nickel mit Goldflash (<0.2μm) |
bei Messing: Kupfer oder Nickel Nickel, Nickel - Phosphor Nickel Nickel |
50 - 90 300 - 600 500 - 1100 70 - 100 100 - 200 250 - 300 300 - 400 |
0.5 - 1 0.5 - 0.8 0.2 - 0.5 0.2 - 0.5 0.2 - 0.5 |
Mechanische Plattierung | Gold-Nickel (AuNi 5 -10) Silber-Palladium (AgPd 10 - 30) |
Nickel Nickel |
160 - 200 120 - 170 |
0.2 - 0.5 0.2 - 0.5 |
Feuerverzinnung | Zinn | Intermetallische Verbindung (1) Zinn - Kupfer | 400 - 500 |
(1) entsteht beim Verzinnungsprozess