Difference between revisions of "Data Book of Electrical Contacts"

From Electrical Contacts
Jump to: navigation, search
 
(14 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
 
{|class="mainPage" cellpadding="0" cellspacing="10"
 
{|class="mainPage" cellpadding="0" cellspacing="10"
|<h4>Featured Article</h4>
+
|{{MainArticles}}
{{MainArticles}}
 
 
|<h4>Featured Files</h4>
 
|<h4>Featured Files</h4>
 
{{MainPicture}}
 
{{MainPicture}}
 
|}
 
|}
<div class="clear">
 
==List==
 
[[Foreword]]
 
== Starthilfen ==
 
  
* [//www.mediawiki.org/wiki/Manual:Configuration_settings Liste der Konfigurationsvariablen]
+
[[de:Wiki_der_elektrischen_Kontakte]]
* [//www.mediawiki.org/wiki/Manual:FAQ MediaWiki-FAQ]
+
 
* [https://lists.wikimedia.org/mailman/listinfo/mediawiki-announce Mailingliste neuer MediaWiki-Versionen]
 
* [//www.mediawiki.org/wiki/Localisation#Translation_resources Lokalisiere MediaWiki für deine Sprache]
 
 
__NOTOC__
 
__NOTOC__
 
__NOEDITSECTION__
 
__NOEDITSECTION__

Latest revision as of 16:18, 26 September 2014

Welcome to our Wiki of electrical contacts

The basis of this Wiki is the 2012 issue of the "DODUCO Data Book of Electrical Contacts" which is also available in printed form.
To get your desired information, please use:

For further questions or help, please contact us directly under Contact DODUCO


Featured Article

AlCunnect - Aluminium Kupfer Hybridwerkstoff

AlCunnect

AlCunnect ist ein Werkstoffverbund bestehend aus Aluminium und Kupfer. Die Herstellung geschieht durch Kaltwalzplattierung mit anschließender Wärmebehandlung und ermöglicht so die formschlüssige Verbindung der beiden Metalle. Dabei lässt sich zwischen zwei unterschiedlichen Varianten des Verbundwerkstoffs AlCunnect unterscheiden.

Der Überlappverbund wird durch überlappendes Plattieren von Aluminium und Kupfer hergestellt. Beim Flächenverbund hingegen werden die Kupfer- und Aluminiumhalbzeuge vollflächig platti...

Featured Files

Influence of the corrosive gas concentration for four classes.jpg
Influence of the corrosive gas concentration for four classes (I–IV) on the contact resistance of a porous gold layer as a function of the exposure time (Battelle)
Pages: Testing Procedures,
Prüfverfahren

by Doduco Redaktion


Softening of AuAg20Cu10 after annealing for 0.5 hrs.jpg
Softening of AuAg20Cu10 after annealing for 0.5 hrs after 80% cold working
Pages: Gold Based Materials,
Werkstoffe auf Gold-Basis

by Doduco Redaktion