===<!--6.1 --> Application Ranges for Switching Contacts===

====<!--6.1.1 -->Low and Medium Electrical Loads====Switching processes at low and medium electrical loads are experienced for example in relays and switches for the measuring technology, telecommunications, automotive usage, and appliances. The switching voltage ranges from μV to 400V with currents between μA and about 100A.

Main ArticelArticle: [[Low and Medium Electrical Loads| Low and Medium Electrical Loads]]

====<!--6.1.2 -->High Electrical Loads====At With high electric electrical loads that , as usually occur occuring in power engineering devices equipment, the switching phenomena are mostly related usually due to arc formationarcing. For most applications the management of the switching arc is the key problem. Depending on the device type , different require-ments requirements are dominant , which influence the selection of the contact material. Similar to those in communications engineering, issues related to the switching characteristics and current path have to be considered.

Main ArticelArticle: [[High Electrical Loads| High Electrical Loads]]

===<!--6.2 -->Contact Materials and Design of Contact Components===The highest reliability and electrical life of electromechanical components and switching devices can only be achieved if both, the material selection and the design of the actual contact parts, are optimized. Economic Of course, economic considerations must of course also be applied when selecting the most suitable contact material and its way of application as an electrical contact. In the following <xr id="tab:Material Selection and Contact Component Design"/><!--Table 6.1 --> recommendations are made for selected application examples for contact materials and contact shape or configuration.

<figtable id="tab:Material Selection and Contact Component Design"><caption>'''<!--Table 6.1: -->Material Selection and Contact Component Design (2 teile!)'''</caption>

Table 6.1{| class="twocolortable" style="text-align: left; font-size: 12px"|-!Type of Contacts or Devices !Characteristic Requirements for Contacts!Contact Material Selection !Design Form of Contacts|-|Contacts for dry circuits|Reliable contacting at very low currents and voltages and mostly at also<br />low contact forces|AuAg alloys, (AuPt), Au|Contact rivets, welded miniature profiles (tapes), electroplated Au, sputtered Au layers|-|Switching contacts in measuring devices|Reliable switching at low voltages and currents at low contact forces|Au and Pt alloys, (AgPd alloys)|Contact rivets, welded tips, clad parts|-|Keyboard contacts|Defined contacting, close to bounce-free make, high reliability at low switching loads|Au alloys, (AgPd), Au on Ni substrate|Au plated snap discs, Au clad wires and stamped parts, hard gold electroplated contact spots on printed circuit boards|-|Rotary switches on printed circuit boards|Good frictional wear resistance, low contact résistance|Sliding track: hard gold on Ni substrate Slider: AgPd alloy, (Hard silver)|Electroplated coatings on slide tracks; clad, welded, or riveted stamping parts|-|Slip rings with high reliability|Low and consistent contact resistance at low contact forces|Brushes: Au alloys, AgPd, AgPdCu; Slip rings: Au alloys, Ag alloys (Rh); For higher currents: Ag/C brushes against Ag slip rings|Brush wires, stamped brushes; solid, clad, or electroplated slip rings, Ag/C formed parts|-|Sliding contacts in miniature motors|Very high frictional wear resistance, sure contacting even at very low contact forces|Ag and Au alloys, Pd alloys, Au multi component alloys|Brushes from flat rolled wire or stamped; collector hard gold electroplated or clad; made from miniature profile segments|-|Centrifugal controllers for small motors|Little shape changes, defined contacting at very low contact forces and high frequency of operation|Pd alloys|Contact rivets, contact screws, welded parts|-|Connectors|Low contact resistance, corrosion resistance, sufficient frictional wear resistance, good sliding capabilities|Ag and Au alloys, Pd, PdNi; For automotive and consumer electronic at low operation numbers: Sn and Sn alloys|Electroplated layers or clad, often Au flash plated, mostly with Ni substrate layer, stamped parts from hot tin dipped strip|-|Telecommunication relays|Reliable contacting even at high operational frequency|Ag, AgPd, Au alloys, PdRu|Rivets, welded profile segments|-|Reed relay contacts|High reliability at low currents independent of atmospheric environment|Au, (Rh)|Switch paddles FeNi with partially diffused Au, (electroplated Rh)|-|Relays in electronic circuits|High reliability at low switching loads and compact device design|Au alloys, AgPd, Ag alloys|Stamped springs from seam-welded profiles, welded miniature profile (tape) segments, contact rivets|-|GP relais (Elementary relays)|Low arc erosion, high weld resistance, low and consistent contact resistance|Ag/Ni, Ag/SnO₂, (Ag/CdO), Ag/ZnO,AgNi0.15, (Ag)|Solid and composite contact rivets, welded miniature profile (tape) segments|-|Automotive relays|Low material transfer, low contact resistance, high weld resistance|AgNi0.15, Ag/SnO₂, Ag/Ni|Contact Component Design rivets, welded miniature profile (tape) segments|-|Flasher relays (automotive, > 3 Mio operations)|Low material transfer, high arc erosion resistance, low contact resistance|PdCu15 and 40 (Anode) vs. AgNi0.15, AgCu3 (Cathode), Ag/ZnO, Ag/SnO₂|Contact rivets, welded miniature profile (tape) and strip segments|-|Breaker points (automotive ignition)|Very high arc erosion resistance, high switching frequency|W|Tips or discs welded to formed parts or Fe supports|-|Automotive horn contacts|High arc erosion resistance at extremely high number of switching operations|W, Ag/SnO₂|Contact rivets, W weld buttons, springs or formed parts with brazed or welded tips|-|Appliance switches|Low contact resistance, reasonable arc erosion and weld resistance|AgNi0.15, Ag/Ni, Ag/SnO₂, (Fortsetzung Ag/CdO)|Contact rivets, welded contact parts|- |Temperature controllers (Thermostats)|Defined contacting point even at slow motion make, high operating temperatures|AgNi0.15, Ag/Ni, Ag/SnO_{2 Teile!}, (Ag/CdO)|Contact rivets, welded contact parts, weld buttons|-|Wiring devices (Light switches)|Low contact resistance, reasonable arc erosion and weld resistance|AgNi0.15, AgCu, Ag/Ni, with make peaks also Ag/ZnO, (Ag/CdO)|Contact rivets, welded contact parts|}</figtable>

===6.3 Table 1: '''Material Selection and Contact Component Design Technologies for Contacts===A multitude of technologies is available and used for the actual manufacturing of contact components (see chapter 3Fortsetzung). The desired contact shape however requires specific material properties like for example formability and weldability which cannot be fulfilled by all materials in the same way. In addition the design of the contact part must be compatible with the stresses and requirements of each switching device. The following table 6.2 combines contact design, contact material, and specific applications.'''

Table 6{| class="twocolortable" style="text-align: left; font-size: 12px"|-!Type of Contacts or Devices !Characteristic Requirements for Contacts!Contact Material!Design Form of Contacts|-|Automatic staircase lighting switches|High arc erosion and weld resistance|Ag/Ni, Ag/SnO₂, (Ag/CdO), Ag/C against Ag/SnO₂|Rivets, welded contact parts|-|Miniature Circuit breakers|Extremely high weld resistance, low temperature rise in use, sufficient arc erosion resistance|I< 50 A: Ag/C97/3 (Cu/C) against Cu, I> 50 A : Ag/C97/3 o. 95/5 against AgCu3, Ag/Ni90/10 o. 80/20, Ag/W, Ag/WC (USA)|Welded contact parts (Ag/C), clad stamped parts|-|Fault current circuit breakers|Extremely high weld resistance, low contact resistance, high arc erosion resistance|Stationary contact: Ag/C96/4 o. 95/5 Movable contact: Ag/Ni, Ag/MeO, Ag/W, Ag/WC, Ag/WC/C|Welded and brazed contact parts|-|Micro snap switches|Low contact resistance, no sticking during make operation|AgNi 0,15, Ag/Ni, Ag/SnO₂, (Ag/CdO)|Rivets, clad or welded contact parts|-|Control and auxiliary switches|Low contact resistance over extended life span|Ag, AgNi 0,15, AgCu, Ag/Ni|Rivets, clad stamped parts, (gold plated rivets), welded contact parts|-|Auxiliary and control relays|High reliability over extended life span, low contact resistance|AgNi 0,15, Ag/Ni|Rivets, clad profile parts, welded contact parts|-|Cam switches (higher loads)|High arc erosion and weld resistance, low contact resistance|AgCu, Ag/Ni, Ag/SnO₂, Ag/ZnO, (Ag/CdO)|Rivets, welded contact parts|-|Contactors|High arc erosion and weld resistance, low contact resistance|I< 20A : Ag/Ni, Ag/SnO₂ I>20A : Ag/SnO₂, (AgCdO)|Welded and brazed contact tips|-|Motor -protective circuit breakers|Extremely high weld resistance, low contact resistance|Ag/ZnO, Ag/C against Ag/Ni|Welded contact parts, toplay stamping parts|-|Power switches and circuit breakers|Extremely high arc erosion and weld resistance, low contact resistance|Ag/ZnO, Ag/SnO₂ , Ag/C against Ag/Ni o. Ag/W, Ag/W, Ag/WC/C, Ag/W against Ag/CdO|Brazed and welded contact tips and formed parts|-|Power switches with arcing and main contacts|High weld resistance, low contact resistance, high arc erosion resistance|Arcing contacts: W/Ag, W/Cu, (Cu) Main contacts: Ag/Ni, Ag/ZnO, Ag/W, Ag/WC|Brazed and welded contact tips and formed parts|-|Disconnect switches|Low contact resistance, sufficient mechanical strength|AgNi 0,15, Ag/Ni, Ag (electroplated)|Electroplated coatings, brazed contact parts|-|High voltage circuit breakers|Arcing contacts: highest arc erosion resistance Main contacts: low contact resistance|Arcing contacts: W/Cu-infiltrated Main contact CuCrZr silver plated,|Cast-on, electron-beam welded (or brazed) formed parts, percussion welded pins|-|Load disconnect switches (medium and high voltage)|Low contact resistance, sufficient mechanical strength, high arc erosion resistance of precontacts|Arcing contact: W/Cu, Cu, Ag/C Main contact: Cu, CuCrZr silver plated, Ag/Ni, AgNi0,15, Ag/C|Arcing contacts: brazed or welded parts Main contacts: silver plated, brazed or welded parts|-|Vacuum contactors|Low chopping current, high arc erosion resistance, low contact resistance|Low gas content W/Cu, W/CuSb, WC/Ag, CuCr|Contact discs, shaped rings|-|Vacuum circuit breakers|High switching capacity, low contact resistance|Low gas content CuCr|Contact discs|-|Transformer tab changers|High arc erosion resistance in oil environment|W/Cu in filtrated with approx.70%|Brazed contact tips|-|Disconnect switches in high voltage circuits|Low contact resistance, low mechanical wear, sufficient arc erosion resistance during current commutation|Ag (electroplated), AgNi0,15, Ag/SnO₂|Electroplated coatings, brazed parts, Toplay profile segments|}'''Notes:'''<xr id="tab: Material Selection and Contact Component Design Technologies "/><!--Table 6.1--> is meant to give suggestions for Contacts (the use of contact materials for the specified devices. For most of the contact materials, we deliberately did not indicate the exact composition and, as for Ag/SnO₂ and AgZnO, did also not include specific additives. The final material composition depends on specific design parameters of the electrical device. Advise on the special properties of specific contact materials can be found in chapter 2 Teile!)[[Contact Materials for Electrical Engineering| Contact Materials for Electrical Engineering ]].

Table ==<!--6.2: 3-->Design Technologies for Contacts ==A multitude of technologies is available and used for the actual manufacturing of contact components (Fortsetzungsee chapter 3 [[Manufacturing Technologies for Contact Parts|Manufacturing Technologies for Contact Parts]]) . The desired contact shape however, requires specific material properties like formability and weldability, which cannot be fulfilled by all materials in the same way. In addition, the design of the contact part must be compatible with the stresses and requirements of each switching device. The following <xr id="tab:Design Technologies for Contacts"/><!-- (table 6.2 Teile!)--> combines contact design, contact material and specific applications.

<figtable id====6.4.1 Definition of Terms and Symbols====Note"tab: The symbols Design Technologies for electrical contact specific terms (i.e. contact area,contact resistance, etc. have been retained from the german version of the DataBook. In related English literature some of them may vary using subscriptsymbols related to the language used – for example “contact resistance”: asContacts">used here from german R<subcaption>k'''</sub!--Table 6.2:-->, in english mostly R<sub>cDesign Technologies for Contacts'''</subcaption>.

*'''Electrical {| class="twocolortable" style="text-align: left; font-size: 12px"|-!Contact Parts, Semi-finished Materials!Typical Contact Materials and Dimensions!Main Areas of Application!Remarks|-|Contact rivets solid, inserted wire segments|Ag, Ag alloys, Au alloys, Pd alloys, Ag/Ni, Ag/C97/3, Ag/MeO (1.2 – 8 mm Ø)|All types of switches in the communications, automotive or power distribution technology simple contact''' is a property which is generated component, universally applied, selection through economic aspects|Secure rivet attachment only with sufficiently thick shank (shank Ø = 1⁄2 head Ø); change-over contacts by forming secondary head from longer shanks|-|Contact rivets, clad (Composite Rivets)|Ag, Ag alloys, Ag/Ni, Ag/MeO on Cu base (2 ~ 10 mm Ø)|All types of switches in the touching communications, automotive or power engineering|Secure rivet attachment only with sufficiently thick shank (shank Ø = 1⁄2 head Ø)|-|Contact rivets with brazed surface layer|Tungsten and difficult to form powder metallurgical materials (i.e. Ag/C) on Cu or Fe bases (1 ~ 12 mm Ø)|Switches for power engineering, W layers mostly for controls|Tungsten contact to be staked (riveted) with moderate force or using orbital riveting; for Fe bases also warm-forming|-|Contact screws|Any contact material on Fe and CuZn screws, brazed, (1 ~ 10 mm Ø, M 2 ~ M 10)|Adjustable contacts for controls and horns|During brazing carrier may get soft|-|Vertically welded wire segments|Ag, Ag alloys, Ag/Ni, AgPd, Au alloys (wire 0.6 ~ 5 mm Ø)|Contact parts for control functions and power engineering; economical manufacturing at higher quantities|Welding and subsequently heading or orbital forming of head shape|-|Horizontally welded wire and profile segments|Au alloys, Pd alloys, Ag, Ag alloys, Ag/Ni, Ag/MeO, Ag/C in strip or profile form, Miniature profiles - also multi-layered (profile width 0.2 ~ 5 mm)|Contact parts for communication, measurement, controls and power engineering; very economical with respect to precious metal usage|Welding synchronized to stamping / forming on special equipment|-|Weld buttons|Ag, Ag alloys, Ag/Ni, Ag/MeO on Steel, Ni, Monel; Ag/W, Ag/Mo (1.5 ~ 10 mm Ø)|Welded for example to steel springs or thermostatic bimetals for temperature controls|Metallurgical bond through simple projection welding remains strong in temperature cycling applications|-|Tungsten weld buttons|W on Ni or Ni-plated Fe, (2 ~ 6 mm) with weld projections|Contacts for controls, ignition points and horns; arcing contacts in special relays|For change-over contact welded on both sides ofcarrier|-|Brazed contact tipstwo electrically conducting surfaces|All materials and dimensions, oxide and graphite containing materials with brazable backing, carrier parts from Fe, Cu and Cu alloys, at higher strength requirements also CuCrZr or CuBe|Medium and higher load switching devices for power engineering|Braze alloy layer with low meting point, carriers may soften during brazing|-|Clad contact materials (Contact Bimetals), totally covered or with inlayed strips|Ductile precious metals on Cu and Cu alloys, minimum precious metal layer 2% of total strip thickness for Ag and Ag alloys, 0.5% of total strip thickness for Au alloys (with Ni intermediate layer), max. inlayed thickness 50% of total, strip width starting at 2 mm|Clad contact springs; stamped and formed parts for communications and power engineering; aluminum clad for bonding capability|Metallurgical bond; inlayed strip stamped perpendicular or at angle to strip direction; avoid bends at the cladding edges|-|Strips or profiles with brazed contact material layers (Toplay material)|Ag, Ag alloys, Ag/Ni, Ag/MeO on Cu and Cu alloy carriers, total width 10 ~ 100mm, carrier thickness 0.3 – 5 mm, Ag strip cross section from 0.3 x 3 mm², strip thickn. to be &le; carrier thickn.|Stationary and moving contact bridges for power engineering switching devices|Contact layers brazed with Ag brazing alloys; strips re-hardened during profile rolling|-|Seam-welded contact strips or profiles|Wire, strip, miniature profiles (solid or clad) welded to Cu alloy carrier strip (0.3 – 3 mm Ø or up to 5 mm width)|Switches, pushbuttons, relays, auxiliary contactors, sliding contacts|Broad usability, highly economical, thin spring hard carriers can be used|-|Miniature profiles (Weld tapes)|Mostly high precious contact materials, double or multi layer, Ni, Monel, or Cu alloy carrier; miniature-profile width 0.2 – 2 mm|Welded profile segments for contact parts in communication, measurement and control engineering|Manufacturing of cross-directional contact spots; most economical precious metal usage|}

*Table 2: '''Contact areaDesign Technologies for Contacts (Fortsetzung)''' is the whole area on a contact part that may be used forcontacting.

*'''Apparent {| class="twocolortable" style="text-align: left; font-size: 12px"|-!Contact Parts, Semi-finished Materials!Typical Contact Materials and Dimensions!Main Areas of Application!Remarks|-|Clad profiles|Ag, Ag alloys, Ag/Ni, Ag/MeO, on Cu or Cu alloy carriers, all cross-sectional areas that can be drawn or rolled; Profile width: 2 ~ 10 mm|Profile segments as contact area Aareas for low and high voltage switching devices|More complex shapes require costly tooling|-|Sintered and infiltrated parts|W-, WC-, Mo-based materials, in almost any contact shapes|Contact parts for low and high voltage switching devices|Single parts pressing; mostly with weld projec- tions and braze alloy coating on underside|-|Formed arc erosion parts|W/Cu infiltration materials, parts in almost any shapes|Arcing contacts for extreme duty switching devices, i.e. SF_s6''' is the part of the circuit breakers|Attachment to Cu carriers by cast-on, percussion welding, electron-beam welding; rarely by brazing|-|Low gas content contact parts|W/Cu-, WC/Ag-, CuCr-based materials, rings and discs in almost any shape|Shaped contact parts for vacuum switches (contactors, power switches, circuit breakers)|Brazing to Cu carriers requires special brazing alloys|-|Cast-on contact parts|W/Cu cast on with Cu, shaped parts and rings up to 100 mm Ø|Arcing contacts in high voltage switchgear|Seamless bond interface, carriers get hardened through subsequent forming|-|Electron-beam welded contact parts|W/Cu on Cu or CuCrZr contact area rods, tubes, tulips|Arcing contacts in high voltage circuit breakers|Seamless bond interface, withstands high mechanical and thermal stresses|-|Silver electroplating|Layer thickness up to 20 μm, mostly on Cu and Cu alloys|Connecting areas and no-load switching contacts in power engineering; rotary switches, sliding contacts, connectors|For switching contacts only under very low loads|-|Gold electroplating|Flash plating 0.1 – 0.2 μm on Ag alloys, and Cu alloys; contact layers 0.5 – 5 μm mostly with intermediate Ni layer|Contacts with low current and voltage loads, connectors, rotary and sliding switches, contact areas on printed circuit boards|Flash plating only limited effective as corrosion resistant layer on silver contacts|-|Selectively electroplated strips|Stripe coatings: Tin plating 1- 10 μm, Ag plating 1 – 20 μm, Au plating 0.2 – 5 μm; stripe width 2 mm min, stripe distance > 2 mm; carrier material: Cu and Cu alloys, Ni alloys, stainless steel; strip thickness: 0.1 ~ 1 mm; strip width: 5 ~ 100 mm|Contact parts for connectors, keyboard switches, rotary and sliding switches; bondable areas (Au) for electronic components|Economic manufacturing for partially plated parts that; hard gold with Ni intermediate layer possible but has limited formability|-|Selectively electroplated pre-stamped strips, Spot gold plating|Continuous partial electroplating of pre-stamped and coined contact spots; allcan make physical precious metals; intermediate layers of Cu or Ni; selective tinning of connector contact during the touching areas and terminal ends; carrier materials up to 1 mm thick, strip width up to ~ 80 mm|Precious metal plating of two switching contacts, connector parts, and terminal pins in the communication technology|Crack-free and wear resistant layers possible since contact areas are already formed to final shape|-|Sputtered profiles|Au, Au alloys in any composition; layer thickness 0.1 – 5 μm|Contact profiles for relays, switches and keyboard contacts in the information and measuring technology|High purity contact layers for high reliability|-|Hot-dip tinned strips|All around or stripe tinning 1 ~ 15 μm|Connectors for automotive and consumer technology; screw and crimp connectors|Economic coating method; does not form (Sn) whiskers|}</figtable>

*'''Load bearing contact area A==<sub!--6.4-->t</sub>''' is the part of the apparent contact area whichis affected by the contact force. It is the sum of all microscopic actual touchingpoints.Formulas and Design Rules==

*'''Effective contact area A===_w''' is the part of the load bearing contact area throughwhich current is flowing and therefore the sum of all current carrying touchingareas (a!--spots), A_w< A_t< A_s6.4. *'''Contour area A_n''' is the contiguous area which includes all effectivea1--spots, A_w< A_n< A_s; A_n≠ A_t. *'''Contact resistance R_k''' is composed Definition of the constriction resistance Terms and the filmSymbols===resistanceNote: The symbols for electrical contact specific terms (i. *'''Constriction resistance R_e''' is the incremental electrical resistance generatedby the constriction of the currents paths in the touching . contact area,(a-spot). *'''Film contact resistance R_f''' is generated by a foreign matter layer, which for exetc. isformed by a reaction have been retained from the german version of the contact material surface with the surroundingDataatmosphere (a surface film is a substance on the contact surface withdifferent properties than those Book. In related English literature some of the actual contact material).them may vary using subscript *'''Path resistance R_d''' is symbols related to the total electrical resistance between referencelanguage used – for example “contact resistance”: aspoints (usually the device terminals) which can be freely chosen but mustbe defined. It is the sum of the conductor resistance used here from german R_bk and the contact resistance , in english mostly R_k. *'''Contact force F_kc''' is the force that is exerted between the two contactparts in the closed position. *'''Frictional wear''' is the loss of material caused by mechanical wearbetween contact parts. *'''Bounce''' is the single or multiple interruption of conduction betweencontact parts during the make operation caused by alternatingtransformation of kinetic to potential energy. *'''Contact wear''' includes all changes on a contact surface. Mechanicaland electrical wear must be distinguished. *'''Material transfer''' is the transfer of contact material from one contactpart to the other. It occurs mainly during switching of DC loads. Thedirection of the transfer depends on the load circuit properties and thecontact materials used. *'''Arc erosion''' is the loss of material into the surrounding of the contactspot which is generated by electrical arcing. It occurs during contact makeas well as break operations. *'''Contact welding''' occurs when melt-liquefied touching areas of thecontact parts come in contact with each other. The melting occurs duringhigh current carrying through these areas. During make operations thisoccurs through bounce arcs, on closed contacts a too high contactresistance or dynamic separation of the contacts due to high short circuitcurrents can cause the welding of the contacts. The welding then maycause a device failure if the device specific opening forces cannot breakthe weld connection. *'''Arc movement''' happens when during the break operation a sufficiently highmagnetic field is generated which exerts a force on the electrical arc which isthen moved from the originating spot towards an arc chute (or arc splittingplates). *'''Arc extinguishing''' means the process of letting the current go to zero andtransferring the arcing gap from a conducting to the non-conducting stage.Selecting the most effective extinguishing measures depend mostly on thecurrent characteristics, the current value and the circuit voltage. *'''Recovery''' of an arc gap during contact opening is defined as the process ofthe electrically conducting plasma of an arc losing its electrical conductivity afterreaching current-zero. *'''Symbole used''' bild ===6.4.2 Contact Physics – Formulas=== *'''Constriction resistance''' Re = D/2a(Single spot contact according to Holm; circular touching spot between cleancontact surfaces)Re = D/2Na(Multi-spot contact according to Holm without influence between the Nindividual spots)Re = D/2 x E ai + 3B D/32N² x E E (sij) i = j(Multi-spot contact according to Greenwood considering the influence betweenthe spots) als bild?  *'''Contact resistance'''RK = Re + Rf *'''Path resistance'''Rd = Rb + RK *'''Contact resistance and contact force'''R = 280D ³ E(F · r) K K(According to Holm model for film-free spherical contact surfaces with plasticdeformation of the contact material; F < 1 N for typical contact materials) kRK = 9000 D H/ FK(According to Holm model for film-free spherical contact surfaces with plasticdeformation of the contact material; F > 5 N for typical contact materials)  *'''Dynamic contact separation''' (without considering magnetic fields caused by the current path)

FA 0,8 x I²(Rule Main Article: [[Definition of thumb with F in N Terms and I in kA)Symbols| Definition of Terms and Symbols]]

*'''===<!--6.4.2-->Contact voltage and max. contact temperature'''T kmax 3200 UKPhysics – Formulas===

*'''Main Article: [[Contact resistance at higher contact forces (according to Babikow)'''R = cF -m K KFor F between 10 and 200 N Kc = material dependent proportionality factorm = shape dependent exponent of the contact forcePhysics – Formulas| Contact Physics – Formulas]]

<div class===6.4.3 Closed Contacts==="multiple-images">

Fig<figure id="fig:Rough flat surface">[[File:Rough flat surface. 6.5jpg|left|thumb|Figure1: Rough flat surface. a) before and b) during making contact with an ideally

contact areas (not to scale; dashed lines are elevation lines)]] Fig. 6.6:Contact resistance of crossed rodsas a function of the contact force for gold, silverand silver-palladium alloys Table 6.3: Thermo-electrical Voltage of Contact Materials (against Copper)  ===6.4.4 Switching Contacts=== *'''Effects during switching operations''' Fig. 6.7 Contact opening with arc formation (schematic) *'''Influence of out-gasing from plastics'''Fig. 6.9:Histogram of the contactresistance R of an electroplated Kpalladium layer (3 μm) with andwithout hard gold flash plating(0.2 μm) after exposure withdifferent plastic materials Fig. 6.10: Contact resistance with exposure to out-gasing from plastics as a function of numbers ofoperations at 6 V ,100 mA: 1 Silicon containing plastic; 2 Plastics with strongly out-gasing DCcomponents; 3 Plastics with minimal out-gasing components *'''Influence of corrosive gases on the contact resistance''' Fig. 6.11: Distribution of cumulative frequency H of the contact resistance for solid contact rivetsafter 10 days exposure in a three-component test environment with 400 ppb each of H₂S, SO₂ andNO₂ at 25°C, 75% RH; Contact force 10cN; Measuring parameters: ≤ 40 mV_DC,10 mA; Probingcontact: Gold rivet Fig. 6.8: Influences on contact areas in relays  *'''Contact Phenomena under the influence of arcing Matertia'''*'''Material transfer'''Fig. 6.12: Material transfer under DC load a) Cathode; b) Anode.6 Material: AgNi0.15; Switching parameters: 12VDC, 3 A, 2x10 operations *'''Arc erosion''' Fig. 6.13 Arc erosion of a Ag/SnO₂ contact pair after extreme arcing conditionsa) Overall view; b) Partial detail view *'''Contact welding'''Fig. 6.14: Micro structure of a welded contact pair (Ag/SnO₂ 88/12 - Ag/CdO88/12) after extremely high current load. a) Ag/SnO₂ 88/12; b) Ag/CdO88/12  ===6.4.5 Physical Effects in Sliding and Connector Contacts=== *'''Mechanical wear of sliding contacts''' dV/dx = k x FK /3 HW3 dV/dx Wear volume in mm per slide path length in mmk Coefficient of frictional wearHW Hardness of the softer material(Brinell or Vickers units)FK Contact force in cNWear coefficient k during material transfer-4 Silver – Silver 120 x 10-4 Platinum – Platinum 400 x 10-4 Silver – Platinum 1.3 x 10Coefficient of fractional wear k during wear loss-4 Silver – silver 8 x 10-4 Gold – gold 9 x 10-4 Platinum – platinum 40 x 10-4 Silver – gold 9 x 10-4 Silver – platinum 5 x 10 Fig. 6.15: Coefficient of frictional wear for the wear loss of sliding contacts Silver/Silverand hard gold/hard gold as a function of the contact force *'''Contact behavior of connectors'''Fig. 6.16: Contact resistance R as a function kof the contact force F for different surface kcoating materials. Measured against aspherical gold probe; I = 10 mA, U < 20 mV Fig. 6.17: Contact resistance R as a function kof the fretting wear cycles for different surfacecoating materials Tab.6.4: Surface Coating Materials for Connectors  ===6.4.6 General Rules for Dimensioning of Contacts===*'''Recommended Minimum Contact Forces at Slightly SlidingContact Make:''' Gold 0.03 NSilver 0.1 NTungsten 0.5 N *'''Contact Force Recommendations:''' Signal relays >3 cNAC power relays > 20 cNAutomotive relays > 20 cNMotor switches (Contactors) 0.05 - 0.08 N/A(Silver – Metal oxide contacts)Power switches 0.1 - 0.2 N/AConnectors figure> 30 cN/contact element(Gold coating)Connectors > 50 cN/contact element(Silver coating)Connectors > 1 N/contact element(Tin coating) *'''General Rules for Dimensioning of Contact Rivets'''bild *'''Head diameter for electrical loads''' For AC currents: approx. 1 – 1.5 A/mm²For 1 A min. 2 mm head diameter10 A approx. 3 – 3.5 mm head diameter20 A approx. 5 mm head diameterFor DC currents: approx. 0.5 – 0.8 A/mm² *'''Head radius R for electrical loads''' for I < 1 A R 1,5 mmI = 6 A R 5 mmI = 10 A R 10 mmI = 20 A R 15 mm *'''Failure Probability of Single and Double (Bifurcated) Contacts''' (according to Thielecke) Fig. 6.18: Failure probability of a contact as afunction of the voltage (according to Kirchdorfer);Ag/Ni10; 10 mA Fig. 6.19: Failure probability of a contact as afunction of the current (according toKirchdorfer); Ag/Ni10; F = 0.45 N; U = 24 V ===6.4.7 Contact Spring Calculations===Fig. 6.20:One side fixed contact bending springL = Length of springE = Modulus of elasticityB = Width of springF = Spring forceD = Thickness of springx = Deflectionmax = maximum bending force The influence of the dimensions can be illustrated best by using the single sidefixed beam model (Fig. 6.20). For small deflections the following equation is valid: F= x3 x E x JL³ where J is the momentum of inertia of the rectangular cross section of the beam J=B x D³12 For springs with a circular cross-sectional area the momentum of inertia is J=BD4/64D= Durchmesser

To avoid plastic deformation <figure id="fig:Contact-resistance-of-crossed-rods">[[File:Contact-resistance-of-crossed-rods.jpg|right|thumb|Figure 2: Contact resistance of crossed rods as a function of the spring the max bending contact force σ cannot be maxfor gold, silver and silver-palladium alloys]]</figure></div>exceeded<div class="clear"></div>

The stress limit is defined through the fatigue limit and the 0.2% elongation limit<figtable id="tab:Thermo-electrical Voltage of Contact Materials (against Copper)">resp<caption>'''<!--Table 6.3:-->Thermo-electrical Voltage of Contact Materials (against Copper)'''</caption>

xmax{| class= "twocolortable" style="text-align: left; font-size: 12px"|-!!Contact Materials!Thermo-electric Voltage (0 - 100°C) [mV]|-|Pure metals|Ag<br />Au<br />Pt<br />Ir<br />Pd<br />Rh<br />Re<br />Cu<br />W<br />Mo| + 0.04<br />+ 0.06<br />+ 0.78<br />+ 0.13<br />+ 1.35<br />+ 0.08<br />+ 0.78<br />0<br />- 0.46<br />- 0.73|-|Alloys/Composite materials|AgCu 3<br />AgPd 30<br />AgPd 40<br />AgPd 50<br />AgPd 60<br />Ag/Ni 10<br />Ag/Ni 20<br />Ag/W 65<br />AuNi 5<br />AuAg 20<br />AuPt 10<br />PtW 5<br />Ptlr 10<br />Ptlr 20<br />PtRu 5<br />PtRu 10<br />PdCu 15<br />PdCu 40| + 0.026<br />+ 0.125<br />+ 0.198<br />+ 0.321<br />+ 0.412<br />+ 0.23<br />+ 0.27<br />+ 0.01<br />+ 4.7<br />+ 2 x L ² Rp0,2.76<br />+ 1.11<br />+ 0.67<br />+ 0.56<br />+ 0.60<br />+ 0.32<br />+ 0.13<br />+ 0.180<br />+ 0.247|}3 x D x E</figtable>

= x L³D³==<!--6 x FE x B.4.7-->Contact Spring Calculations===

*'''Trapezoidal spring''' Deflectionx= x L³E x JF(2 + B /B ) x= x L³E x B x D³12 x F(2 + B /B ) min ma Max. bending force Fmax= 1 8 x F x L(2 + B /B ) x B x D² min max max  ===Referencens=References==