Other Naturally Hard Copper Alloys - Revision history

Doduco Admin: /* Copper-Nickel-Tin Alloys */

2023-01-04T08:16:18Z

‎Copper-Nickel-Tin Alloys

Doduco Admin at 06:45, 2 December 2022

2022-12-02T06:45:34Z

Doduco Admin at 06:44, 2 December 2022

2022-12-02T06:44:41Z

Doduco Admin at 06:42, 2 December 2022

2022-12-02T06:42:47Z

Doduco Admin at 06:42, 2 December 2022

2022-12-02T06:42:14Z

Doduco Admin at 06:40, 2 December 2022

2022-12-02T06:40:29Z

Teitscheid at 22:25, 19 September 2014

2014-09-19T22:25:12Z

Doduco Redaktion: /* Copper-Nickel-Tin Alloys */

2014-05-19T11:22:28Z

‎Copper-Nickel-Tin Alloys

Doduco Redaktion: /* 5.1.5.2 Copper-Nickel-Tin Alloys */

2014-05-19T11:22:14Z

‎5.1.5.2 Copper-Nickel-Tin Alloys

Doduco Redaktion: /* 5.1.5.1 Copper-Nickel Alloys */

2014-05-19T11:20:16Z

‎5.1.5.1 Copper-Nickel Alloys

@@ Line 166: / Line 166: @@
 <figure id="fig:Strain hardening of copper-nickel alloys as a function of nickel content">
-[[File:Strain hardening of copper nickel alloys as function.jpg|left|thumb|<caption>Strain hardening of copper-nickel alloys as a function of nickel content]]
+[[File:Strain hardening of copper nickel alloys as function.jpg|left|thumb|<caption>Strain hardening of copper-nickel alloys as a function of nickel content</caption>]]
 </figure>

@@ Line 6: / Line 6: @@
 Copper-Nickel- multi component alloys with 9 wt% Ni and 2 wt% Sn are used mainly as connector materials because of their suitable mechanical properties, their excellent relaxation behavior and their high corrosion resistance. Other advantages include their high temperature stability and the good solderability, even after longer storage. They are also used as base materials for clad profiles and tapes.
 <div class="multiple-images">
@@ Line 166: / Line 162: @@
 </figtable>
 <sup>1)</sup> t: Strip thickness max. 0.5 mm
 <div id="figures6" class="multiple-images">

@@ Line 5: / Line 5: @@
 ====<!--5.1.5.2-->Copper-Nickel-Tin Alloys====
-Copper-Nickel- multi component alloys with 9 wt% Ni and 2 wt% Sn are used mainly as connector materials because of their suitable mechanical properties, their excellent relaxation behavior, and their high corrosion resistance. Other advantages include their high temperature stability and the good solderability even after longer storage. They are also used as base materials for clad profiles and tapes.
+Copper-Nickel- multi component alloys with 9 wt% Ni and 2 wt% Sn are used mainly as connector materials because of their suitable mechanical properties, their excellent relaxation behavior and their high corrosion resistance. Other advantages include their high temperature stability and the good solderability, even after longer storage. They are also used as base materials for clad profiles and tapes.
 <xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--Fig. 5.21:--> Phase diagram of copper-nickel for the range of 0 – 50 wt% nickel

@@ Line 1: / Line 1: @@
 ====<!--5.1.5.1-->Copper-Nickel Alloys====
-Copper and nickel are in their solid and liquid phase completely soluble in each other (<xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--(Fig. 5.21)-->). Because of their very low electrical conductivity, they are mainly used as resistance alloys (<xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/><!--(Fig. 5.22)-->). The work hardening and softening behavior of CuNi alloys and CuNi9Sn2 are shown in [[#figures6|(Figs. 3 – 7)]]<!--(Figs. 5.23 – 5.27)-->. Coppernickel alloys exhibit high corrosion resistance, good weldabilty and the suitability for cladding to other materials. Because of these and their other properties <xr id="tab:Physical_ Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.15)--> and <xr id="tab:Mechanical_Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.16)--> they are, with and without additives of iron or manganese, widely used as good weldable backing layers on weld buttons and weld profiles (weld tapes).
+Copper and nickel are in their solid and liquid phase completely soluble in each other (<xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--(Fig. 5.21)-->). Because of their very low electrical conductivity, they are mainly used as resistance alloys (<xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/><!--(Fig. 5.22)-->). The work hardening and softening behavior of CuNi alloys and CuNi9Sn2 are shown in [[#figures6|(Figs. 3 – 7)]]<!--(Figs. 5.23 – 5.27)-->. Coppernickel alloys exhibit high corrosion resistance, good weldabilty and the suitability for cladding to other materials. Because of these and their other properties (<xr id="tab:Physical_ Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.15)--> and <xr id="tab:Mechanical_Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.16)-->) they are, with and without additives of iron or manganese, widely used as good weldable backing layers on weld buttons and weld profiles (weld tapes).
 ====<!--5.1.5.2-->Copper-Nickel-Tin Alloys====

@@ Line 1: / Line 1: @@
 ====<!--5.1.5.1-->Copper-Nickel Alloys====
-Copper and nickel are in their solid and liquid phase completely soluble in each other (<xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--(Fig. 5.21)-->). Because of their very low electrical conductivity they are mainly used as resistance alloys <xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/><!--(Fig. 5.22)-->. The work hardening and softening behavior of CuNi alloys and CuNi9Sn2 are shown in [[#figures6|(Figs. 3 – 7)]]<!--(Figs. 5.23 – 5.27)-->. Coppernickel alloys exhibit high corrosion resistance, good weldabilty, and the suitability for cladding to other materials. Because of these and their other properties <xr id="tab:Physical_ Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.15)--> and <xr id="tab:Mechanical_Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.16)--> they are, with and without additives of iron or manganese, widely used as good weldable backing layers on weld buttons and weld profiles (weld tapes).
+Copper and nickel are in their solid and liquid phase completely soluble in each other (<xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--(Fig. 5.21)-->). Because of their very low electrical conductivity, they are mainly used as resistance alloys (<xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/><!--(Fig. 5.22)-->). The work hardening and softening behavior of CuNi alloys and CuNi9Sn2 are shown in [[#figures6|(Figs. 3 – 7)]]<!--(Figs. 5.23 – 5.27)-->. Coppernickel alloys exhibit high corrosion resistance, good weldabilty and the suitability for cladding to other materials. Because of these and their other properties <xr id="tab:Physical_ Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.15)--> and <xr id="tab:Mechanical_Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.16)--> they are, with and without additives of iron or manganese, widely used as good weldable backing layers on weld buttons and weld profiles (weld tapes).
 ====<!--5.1.5.2-->Copper-Nickel-Tin Alloys====

← Older revision		Revision as of 22:25, 19 September 2014
Line 203:		Line 203:
	==References==		==References==
	[[Contact Carrier Materials#References\|References]]		[[Contact Carrier Materials#References\|References]]
		+
		+	[[de:Sonstige_naturharte_Kupfer-Legierungen]]

← Older revision		Revision as of 11:22, 19 May 2014
Line 22:		Line 22:
	</div>		</div>
	<div class="clear"></div>		<div class="clear"></div>
−

@@ Line 3: / Line 3: @@
 Copper and nickel are in their solid and liquid phase completely soluble in each other <xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--(Fig. 5.21)-->. Because of their very low electrical conductivity they are mainly used as resistance alloys <xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/><!--(Fig. 5.22)-->. The work hardening and softening behavior of CuNi alloys and CuNi9Sn2 are shown in [[#figures6|(Figs. 3 – 7)]]<!--(Figs. 5.23 – 5.27)-->. Coppernickel alloys exhibit high corrosion resistance, good weldabilty, and the suitability for cladding to other materials. Because of these and their other properties <xr id="tab:Physical_ Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.15)--> and <xr id="tab:Mechanical_Properties_of_Selected_Copper_Nickel_Alloys"/><!--(Tab. 5.16)--> they are, with and without additives of iron or manganese, widely used as good weldable backing layers on weld buttons and weld profiles (weld tapes).
-====5.1.5.2 Copper-Nickel-Tin Alloys====
+====<!--5.1.5.2-->Copper-Nickel-Tin Alloys====
 Copper-Nickel- multi component alloys with 9 wt% Ni and 2 wt% Sn are used mainly as connector materials because of their suitable mechanical properties, their excellent relaxation behavior, and their high corrosion resistance. Other advantages include their high temperature stability and the good solderability even after longer storage. They are also used as base materials for clad profiles and tapes.
-<xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/> Fig. 5.21: Phase diagram of copper-nickel for the range of 0 – 50 wt% nickel
+<xr id="fig:Phase_diagram_of_copper-nickel_for_the_range_of_0-50_wt_nickel"/><!--Fig. 5.21:--> Phase diagram of copper-nickel for the range of 0 – 50 wt% nickel
-<xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/> Fig. 5.22: Electrical conductivity of copper-nickel alloys as a function of nickel content
+<xr id="fig:Electrical_conductivity_of_copper-nickel_alloys_as_a_function_of_nickel_content"/><!--Fig. 5.22:--> Electrical conductivity of copper-nickel alloys as a function of nickel content
 <div class="multiple-images">
@@ Line 26: / Line 26: @@
 <figtable id="tab:Physical_ Properties_of_Selected_Copper_Nickel_Alloys">
-<caption>'''Table 5.15: Physical Properties of Selected Copper-Nickel Alloys'''</caption>
+<caption>'''<!--Table 5.15:-->Physical Properties of Selected Copper-Nickel Alloys'''</caption>
 {| class="twocolortable" style="text-align: left; font-size: 12px"
@@ Line 106: / Line 106: @@
 <figtable id="tab:Mechanical_Properties_of_Selected_Copper_Nickel_Alloys">
-<caption>'''Table 5.16: Mechanical Properties of Selected Copper-Nickel Alloys'''</caption>
+<caption>'''<!--Table 5.16:-->Mechanical Properties of Selected Copper-Nickel Alloys'''</caption>
 {| class="twocolortable" style="text-align: left; font-size: 12px"
@@ Line 168: / Line 168: @@
 <sup>1)</sup> t: Strip thickness max. 0.5 mm
-<xr id="fig:Strain hardening of copper-nickel alloys as a function of nickel content"/> Fig. 5.23: Strain hardening of copper-nickel alloys as a function of nickel content
+<xr id="fig:Strain hardening of copper-nickel alloys as a function of nickel content"/><!--Fig. 5.23:--> Strain hardening of copper-nickel alloys as a function of nickel content
-<xr id="fig:Strain hardening of CuNi25 by cold working"/> Fig. 5.24: Strain hardening of CuNi25 by cold working
+<xr id="fig:Strain hardening of CuNi25 by cold working"/><!--Fig. 5.24:--> Strain hardening of CuNi25 by cold working
-<xr id="fig:Softening of CuNi25 after 1 hr annealing after 50% cold working"/> Fig. 5.25: Softening of CuNi25 after 1 hr annealing after 50% cold working
+<xr id="fig:Softening of CuNi25 after 1 hr annealing after 50% cold working"/><!--Fig. 5.25:--> Softening of CuNi25 after 1 hr annealing after 50% cold working
-<xr id="fig:Strain hardening of CuNi9Sn2 by cold working (Wieland)"/> Fig. 5.26: Strain hardening of CuNi9Sn2 by cold working (Wieland)
+<xr id="fig:Strain hardening of CuNi9Sn2 by cold working (Wieland)"/><!--Fig. 5.26:--> Strain hardening of CuNi9Sn2 by cold working (Wieland)
-<xr id="fig:Softening of CuNi9Sn2 after 1 hr annealing after 60% cold working (Wieland)"/> Fig. 5.27: Softening of CuNi9Sn2 after 1 hr annealing after 60% cold working (Wieland)
+<xr id="fig:Softening of CuNi9Sn2 after 1 hr annealing after 60% cold working (Wieland)"/><!--Fig. 5.27:--> Softening of CuNi9Sn2 after 1 hr annealing after 60% cold working (Wieland)
 <div id="figures6" class="multiple-images">