The platinum group metals include the elements Pt, Pd, Rh, Ru, Ir, and Os ''(Table <xr id="tab:Properties_Production_Processes_and_Application_Forms_for_Platinum_Metals"/><!--(Tab. 2.6)''-->). For electrical contacts , platinum and palladium have practical significance as base alloy materials and ruthenium and iridium are used as alloying components. Pt and Pd have similar corrosion resistance as gold but because for the reason of their catalytical properties , they tend to polymerize adsorbed organic vapors on contact surfaces. During frictional movement between contact surfaces , the polymerized compounds known as “brown powder” are formed , which can lead to significantly a significant increase in contact resistance. Therefore Pt and Pd are typically used as alloys and not in their pure form for electrical contact applications. <figtable id="tab:Properties_Production_Processes_and_Application_Forms_for_Platinum_Metals"><caption>'''<!--Table 2.6:-->Properties, Production Processes, and Application Forms for Platinum Metals'''</caption> {| class="twocolortable" style="text-align: left; font-size: 12px"|-!Element !Properties!Processing!Forms of Application|-|Ru<br />Ruthenium|Dull grey to silvery white, very hard and brittle,<br />in the presence of oxygen resistant to acids,<br />oxidizes during heating in air|Vapor deposition, sputtering, powder metallurgy,<br />warm-forming only possible at 1200 – 1500°C|Powder; in sheet form, as coatings,<br />and as wire mostly as alloying component|-|Rh<br />Rhodium |Almost silvery white, very hard and brittle, not soluble in acids,<br />oxidizes in air during red anneal|Electroplating, vapor deposition, sputtering,<br />after warm-forming at 800 – 1000°C cold working is possible|Coatings (electroplated), alloying component,<br />in limited form as sheet and wire|-|Pd<br />Palladium|Dull white, resistant to most acids,<br />oxidizes at red anneal|Electroplating, vapor deposition,<br />sputtering, cold working|Sheet, strip, tubing, wire,<br />rivets, and coatings|-|Os<br />Osmium|Bluish white, hardest platinum metal,<br />very brittle, resistant against non-oxidizing acids,<br />oxidizes easily on air|Powder metallurgy|Powder, alloying component|-|Ir<br />Iridium|Almost silvery white, very hard and brittle,<br />acid resistant, oxidizes at red anneal|Vapor deposition, sputtering, powder metallurgy,<br />warm-forming possible at 1200 – 1500°C|Powder, alloying component,<br />in limited amounts as sheet|-|Pt<br />Platinum|Grey white, ductile, acid resistant except for aqua regia,<br />HBr, and HJ, oxidation resistant at red anneal|Electroplating, vapor deposition,<br />sputtering, cold working|Sheet, strip, tubing, wire, rivets, coatings|}</figtable> 

Since Pd was for the longest time rather stable in price , it was looked at seen as a substitute for the more expensive gold. This was followed by a steep increase in the Pd price , which caused a significant reduction in its use in electrical contacts. Today (2011Dec. 2021) the Pd palladium price again is lower than that around 2600 Euro/oz. Alloys of Pt with Ru, Ir, Ni and W were widely used in electromechanical components in the telecommunication industry and in heavy duty automotive breaker points (<xr id="tab:Physical Properties of the Platinum Metals an their Alloys/>). <figtable id="tab:Physical Properties of the Platinum Metals an their Alloys"><caption>'''<!--Table 2.7:-->Physical Properties of the Platinum Metals an their Alloys'''</caption>  {| class="twocolortable" style="text-align: left; font-size: 12px"|-!Material!Platin/Palladium<br/>Content<br/>[wt.%]!Density<br/>[g/cm³]!Melting Point or Range<br/>[°C]!Electrical<br/>Resistivity<br/>[µΩ*cm]!Electrical<br/>Conductivity<br/>[MS/m]!Thermal<br/>Conductivity<br/>[W/m*K]!Temp. Coefficient of the<br/>Electrical Resistance<br/>[10³/K]!modulus of gold<br/>Elasticity<br/>[Gpa]|-|Pt (99,95)| >99,95|21,5|1772|10,6|9,5|72|3,9|173|-|PtIr5|95|21,5|1774 - 1776|22,2|4,5|42||190|-|PtIr10|90|21,6|1780 - 1785|17,9|5,6|29|2,0|220|-|PtRu10|90|20,6|ca.1800|33,3|3,0||0,83|235|-|PtNi6|92|19,2|1670 - 1710|30|3,3||1,5|180|-|PtW5|95|21,3|1830 - 1860|43,4|2,3||0,7|185|-|Pd (99,95)| >99,95|12,0|1554|10,8|9,3|72|3,8|124|-|PdCu15|85|11,3|1370 - 1400|38,5|2,6|17|0,49|175|-|PdCu40|60|10,5|1200 - 1230|33,3|3,0|38|0,28|175|-|PdNi5|95|11,8|1455 - 1485|16,9|5,9||2,47|175|-|}</figtable>

Platinum Today these components have been replaced in many applications by solid state technology and palladium alloys are mainly used similar to the gold based usage of these materials in the form of welded wire and profile segments but rarely as contact rivetsis greatly reduced. Pd alloys however have a more significant importance. Because of the high precious metal prices joining technologies are PdCu15 is widely used that allow the most economic application of the contact alloy , for example in the area where functionally neededautomotive flasher relays. Because of their resistance to material transfer they are used for DC applications and due to their higher arc erosion resistance they sulfide formation PdAg alloys are applied for medium electrical loads up to about 30W in relays and switches ''(Table 2various relay designs.10)''. Multi-With the ability to thermally precipitation harden some multi component alloys based on Pd with higher hardness and PdAgAuPt, they find special usage in wear resistance are mainly used as spring arms in resistant sliding contact systems applications. Pd44Ag38Cu15PtAuZn is a standard alloy in this group (<xr id="tab:Mechanical_Properties_of_the_Platinum_Metals_and_their_Alloys"/><!--(Tab 2.8)--> and DC miniature motors<xr id="tab:Contact_and_Switching_Properties_of_the_Platinum_Metals_and_their_Alloys"/><!--(Tab. 2.9)-->).

Platinum and palladium alloys are mainly used similar to the gold based materials in the form of welded wire and profile segments but rarely as contact rivets. Due to the high precious metal prices, joining technologies are used, that allow the most economic application of the contact alloy in the area where functionally needed. For reason of their resistance to material transfer they are used for DC applications and due to their higher arc erosion resistance, they are applied for medium electrical loads up to about 30W in relays and switches (<xr id==DEVELOP"fig:ImageLIst=====BEGIN====Application_Examples_and_Form_of_Supply_for_Platinum_Metals_and_their_Alloys"/><!--(Table 2.10)-->). Multi-component alloys based on Pd with higher hardness and wear resistance are mainly used as spring arms in sliding contact systems and DC miniature motors.

<xr figtable id="figtab:Table2.6Mechanical_Properties_of_the_Platinum_Metals_and_their_Alloys"/><caption>'''<!--Table 2.68: -->Mechanical Properties, Production Processes, and Application Forms for of the Platinum Metals and their Alloys'''</caption><table class="twocolortable"><tr><th rowspan="2">Material</th><th colspan="2">Tensile Strength [MPa]</th><th colspan="2">Elongation A [File:Properties production platinum metals.jpg|right|thumb|Properties%]</th><th colspan="2">Vickers Hardness HV 1</th></tr><tr><th>soft</th><th>70% cold worket</th><th>soft</th><th>70% cold worket</th><th>soft</th><th>70% cold worket</th></tr><tr><td>Pt (99,95)</td><td>150</td><td>360</td><td>40</td><td>3</td><td>40</td><td>120</td></tr><tr><td>PtIr5</td><td>260</td><td>550</td><td>25</td><td>2</td><td>85</td><td>160</td></tr><tr><td>PtIr10</td><td>340</td><td>570</td><td>24</td><td>2</td><td>105</td><td>210</td></tr><tr><td>PtRu10</td><td>650</td><td>1000</td><td>24</td><td>2</td><td>195</td><td>320</td></tr><tr><td>PtNi8</td><td>640</td><td>950</td><td>22</td><td>2</td><td>200</td><td>320</td></tr><tr><td>PtW5</td><td>530</td><td>860</td><td>21</td><td>2</td><td>150</td><td>270</td></tr><tr><td>Pd (99, Production Processes and Application Forms for Platinum Metals]]95)</td><td>200</td><td>420</td><td>42</td><td>2</td><td>40</td><td>90</td></tr><tr><td>PdCu15</td><td>400</td><td>780</td><td>38</td><td>2</td><td>90</td><td>220</td></tr><tr><td>PdCu40</td><td>550</td><td>950</td><td>35</td><td>2</td><td>120</td><td>260</td></tr><tr><td>PdNi5</td><td>340</td><td>700</td><td>25</td><td>2</td><td>95</td><td>200</td></tr><tr><td>Pd35AuAgPt</td><td></td><td></td><td></td><td></td><td></td><td>420*</td></tr><tr><td>Pd44Ag38Cu15 PtAuZn</td><td/><td/><td/><td/><td/><td>405*</td></tr><tr><td>Pd40Co40W20</td><td/><td/><td/><td/><td/><td>680*</td></tr></table></figtable>

<xr figtable id="figtab:Contact_and_Switching_Properties_of_the_Platinum_Metals_and_their_Alloys"><table class="twocolortable"/><caption> '''<!--Table 2.89: Mechanical -->Contact and Switching Properties of the Platinum Metals and their Alloys'''</caption><tr><th><p class="s11">Material</p></th><th><p class="s12">Properties<th colspan="2"></p></th></tr><tr><td><p class="s11">Pt</p></td><td><p class="s12">Very high corrosion resistance</p></td><td/></tr><tr><td><p class="s11">PtIr5 - 10</p></td><td><p class="s12">Very high corrosion resistance, low contact resistance</p></td><td><p class="s12">High arc erosion resistance, high hardness</p></td></tr><tr><td><p class="s11">PtRu10</p></td><td><p class="s12">Very high corrosion resistance, low welding tendency</p></td><td><p class="s12">Low contact resistance, very</p><p class="s12">high hardness</p></td></tr><tr><td><p class="s11">PtNi8</p></td><td><p class="s12">Low material transfer tendency</p></td><td><p class="s12">Very high hardness</p></td></tr><tr><td><p class="s11">PtW5</p></td><td><p class="s12">Low material transfer tendency</p></td><td><p class="s12">High hardness</p></td></tr><tr><td><p class="s11">Pd</p></td><td><p class="s12">Strong tendency to “Brown Powder” formation</p></td><td><p class="s12">Less arc erosion resistant than Pt</p></td></tr><tr><td><p class="s11">PdCu15</p><p class="s11">PdCu40</p></td><td><p class="s12">Tendency to “Brown Powder” formation</p></td><td><p class="s12">Mostly resistant to material</p><p class="s12">transfer, high hardness</p></td></tr><tr><td><p class="s11">PdNi5</p></td><td><p class="s12">Strong tendency to “Brown Powder” formation</p></td><td><p class="s12">Low welding tendency</p></td></tr><tr><td><p class="s11">Pd44Ag38Cu15</p><p class="s11">PtAuZn</p></td><td><p class="s12">High mechanical wear resistance</p></td><td><p class="s12">Standard material for sliding</p><p class="s12">contact brushes</p></td></tr></table></figtable>

<xr figtable id="fig:Application_Examples_and_Form_of_Supply_for_Platinum_Metals_and_their_Alloys"><table class="twocolortable"/>Fig. <caption>'''<!--Table 2.2710: Phase diagram -->Application Examples and Form of Supply for Platinum Metals and their Alloys'''</caption><tr><th><p class="s11">Material</p></th><th><p class="s12">Application Examples</p></th><th><p class="s12">Forms of platinumSupply</p></th></tr><tr><td><p class="s11">Pt (99,95)</p></td><td><p class="s12">Relays</p></td><td><p class="s12">Contact rivets, welded contact parts</p></td></tr><tr><td><p class="s11">PtIr5</p><p class="s11">PtIr10</p><p class="s11">PtRu10</p><p class="s11">PtNi8</p><p class="s11">PtW5</p></td><td><p class="s12">Relays, sliding contact systems,</p><p class="s12">automotive ignition breaker points</p></td><td><p class="s12">'''Semi-finished Contact Materials''':</p><p class="s12">Wire, seam-iridium[[Filewelded contact profiles</p><p class="s12">'''Contact Parts:Phase diagram of platinum iridium.jpg|right|thumb|Phase diagram of platinum'''</p><p class="s12">Tips, wire-formed parts, solid and composite contact rivets, welded contact parts</p></td></tr><tr><td><p class="s11">Pd (99,95)</p><p class="s11">PdNi5</p></td><td><p class="s12">Relays</p></td><td><p class="s12">Micro-profiles (weld tapes), contact rivets, welded contact parts</p></td></tr><tr><td><p class="s11">PdCu15</p><p class="s11">PdCu40</p></td><td><p class="s12">Automotive flasher relays</p></td><td><p class="s12">Micro-profiles, composite contact rivets</p></td></tr><tr><td><p class="s11">Pd35AuAgPt</p><p class="s11">Pd44Ag38Cu15</p><p class="s11">PtAuZn</p><p class="s11">Pd40Co40W20</p></td><td><p class="s12">Potentiometers, slip rings, miniature</p><p class="s12">DC motors</p></td><td><p class="s12">Wire-formed parts, welded wire segments, multi-iridium]]arm sliding contact brushes</p></td></tr></table></figtable>

'''Table 2<figure id="fig:Influence_of_1-20_atom%_of_different_additive_metals_on_the_electrical_resistivit_ p_of_platinum_(Degussa)">[[File:Influence of platinum degussa.10: Application Examples and Form jpg|left|thumb|<caption>Influence of 1- 20 atom% of different additive metals on the electrical resistivity p of Supply for Platinum Metals and their Alloys'''platinum (Degussa)</caption>]]</figure>

<figure id===END====Table 2.6"fig: Properties, Production Processes, and Application Forms for Platinum MetalsInfluence_of_1-20_atom%_of_different_additive_metals_on_the_electrical_resistivit_ p_of_platinum">[[File:Properties production platinum metalsInfluence of palladium.jpg|rightleft|thumb|Properties, Production Processes and Application Forms for Platinum Metals<caption>Influence of 1-22 atom% of different additive metals on the electrical resistivity p of palladium</caption>]]Table 2.7: Physical Properties of the Platinum Metals and their Alloys</figure>

'''Table <figure id="fig:Phase_diagram_of_platinum-iridium">[[File:Phase diagram of platinum iridium.jpg|left|thumb|<caption>Fig. 2.827: Mechanical Properties Phase diagram of the Platinum Metals and their Alloys'''platinum-iridium</caption>]]</figure>

<table borderfigure id="1" cellspacing="0" style="borderfig:Phase_diagram_of_platinum-collapse:collapsenickel">[[File:Phase diagram of platinum nickel.jpg|left|thumb|<tr><td/><td><p class="s11">soft</p></td><td><p class="s11">70% cold worket</p></td><td><p class="s11">soft</p></td><td><p class="s11">70% cold</p><p class="s11">worket</p></td><td><p class="s11">soft</p></td><td><p class="s11">70% cold</p><p class="s11">worket</p></td></tr><tr><td><p class="s11">Pt (99,95)</p></td><td><p class="s11">150</p></td><td><p class="s11">360</p></td><td><p class="s11">40</p></td><td><p class="s11">3</p></td><td><p class="s11">40</p></td><td><p class="s11">120</p></td></tr><tr><td><p class="s11">PtIr5</p></td><td><p class="s11">260</p></td><td><p class="s11">550</p></td><td><p class="s11">25</p></td><td><p class="s11"caption>Fig. 2.28:Phase diagram of platinum-nickel</p></td><td><p class="s11">85</p></td><td><p class="s11">160</p></td></tr><tr><td><p class="s11">PtIr10</p></td><td><p class="s11">340</p></td><td><p class="s11">570</p></td><td><p class="s11">24</p></td><td><p class="s11">2</p></td><td><p class="s11">105</p></td><td><p class="s11">210</p></td></tr><tr><td><p class="s11">PtRu10</p></td><td><p class="s11">650</p></td><td><p class="s11">1000</p></td><td><p class="s11">24</p></td><td><p class="s11">2</p></td><td><p class="s11">195</p></td><td><p class="s11">320</p></td></tr><tr><td><p class="s11">PtNi8</p></td><td><p class="s11">640</p></td><td><p class="s11">950</p></td><td><p class="s11">22</p></td><td><p class="s11">2</p></td><td><p class="s11">200</p></td><td><p class="s11">320</p></td></tr><tr><td><p class="s11">PtW5</p></td><td><p class="s11">530</p></td><td><p class="s11">860</p></td><td><p class="s11">21</p></td><td><p class="s11">2</p></td><td><p class="s11">150</p></td><td><p class="s11">270</p></td></tr><tr><td><p class="s11">Pd (99,95)</p></td><td><p class="s11">200</p></td><td><p class="s11">420</p></td><td><p class="s11">42</p></td><td><p class="s11">2</p></td><td><p class="s11">40</p></td><td><p class="s11">90</p></td></tr><tr><td><p class="s11">PdCu15</p></td><td><p class="s11">400</p></td><td><p class="s11">780</p></td><td><p class="s11">38</p></td><td><p class="s11">2</p></td><td><p class="s11">90</p></td><td><p class="s11">220</p></td></tr><tr><td><p class="s11">PdCu40</p></td><td><p class="s11">550</p></td><td><p class="s11">950</p></td><td><p class="s11">35</p></td><td><p class="s11">2</p></td><td><p class="s11">120</p></td><td><p class="s11">260</p></td></tr><tr><td><p class="s11">PdNi5</p><p class="s11">Pd35AuAgPt</p></td><td><p class="s11">340</p></td><td><p class="s11">700</p></td><td><p class="s11">25</p></td><td><p class="s11">2</p></td><td><p class="s11">95</p></td><td><p class="s11">200</p><p class="s11">420*</p></td></tr><tr><td><p class="s11">Pd44Ag38Cu15</p></td><td/><td/><td/><td/><td/><td><p class="s11">405*</p></td></tr><tr><td><p class="s11">PtAuZn</p><p class="s11">Pd40Co40W20</p></td><td/><td/><td/><td/><td/><td><p class="s11">680*</p></td></tr><tr><td><p class="s31">*maximum hardness</p></td><td/><td/><td/><td/><td/><td/></trcaption>]]</tablefigure>

Fig. 2.25<figure id="fig: Influence of 1Phase_diagram_of_platinum-20 atom% of different additive metals on the electrical resistivity p of platinum (Degussa)tungsten">[[File:Influence Phase diagram of platinum degussapalladium copper.jpg|rightleft|thumb|Influence <caption>Fig. 2.29:Phase diagram of 1platinum- 20 atom% of different additive metals on the electrical resistivity p of platinum (Degussa)tungsten</caption>]]</figure>

Fig. 2.26<figure id="fig: Influence of 1Phase_diagram_of_platinum-22 atom% of different additive metals on the electrical resistivity p of palladiumcopper">[[File:Influence Phase diagram of palladiumcopper2.jpg|rightleft|thumb|Influence <caption>Fig. 2.30: Phase diagram of 1palladium-22 atom% of different additive metals on the electrical resistivity p of palladiumcopper</caption>]]</figure>

Fig. 2.27<figure id="fig: Phase diagram of platinum-iridiumStrain_hardening_of_Pt_by_cold_working">[[File:Phase diagram Strain hardening of platinum iridiumPt by cold working.jpg|rightleft|thumb|Phase diagram <caption>Fig. 2.31: Strain hardening of platinum-iridiumPt by cold working</caption>]]</figure>

Fig. 2.28: Phase diagram of platinum-nickel[[File:Phase diagram of platinum nickel.jpg|right|thumb|Phase diagram of platinum-nickel]]Fig. 2.29: Phase diagram of platinum-tungsten[[File:Phase diagram of palladium copper.jpg|right|thumb|Phase diagram of platinum-tungsten]]Fig. 2.30: Phase diagram of palladium-copper[[File:Phase diagram of palladium copper2.jpg|right|thumb|Phase diagram of palladium-copper]]Fig. 2.31: Strain hardening of Pt by cold working[[File:Strain hardening of Pt by cold working.jpg|right|thumb|Strain hardening of Pt by cold working]]Fig. 2.32<figure id="fig: Softening of Pt after annealing for 0Softening_of_Pt_after_annealing_for_0.5 hrs after 805_hrs_after_80% cold working_cold_working">[[File:Softening of Pt after annealing.jpg|right|thumb|Softening of Pt after annealing for 0.5 hrs after 80% cold working]]Fig. 2.33: Strain hardening of PtIr5 by cold working[[File:Strain hardening of PtIr5 by cold working.jpg|right|thumb|Strain hardening of PtIr5 by cold working]]Fig. 2.34: Softening of PtIr5 after annealing for 1 hr after different degrees of cold working[[File:Softening of PtIr5 after annealing.jpg|right|thumb|Softening of PtIr5 after annealing for 1 hr after different degrees of cold working]]Fig. 2.35: Strain hardening of PtNi8 by cold working[[File:Strain hardening of PtNi8 by cold working.jpg|rightleft|thumb|Strain hardening of PtNi8 by cold working]]<caption>Fig. 2.3632: Softening of PtNi8 after annealing for 1 hr after 80% cold working[[File:Softening of PtNi8 after annealing.jpg|right|thumb|Softening of PtNi8 after annealing for 1 hr after 80% cold working]]Fig. 2.37: Strain hardening of PtW5 by cold working[[File:Strain hardening of PtW5 by cold working.jpg|right|thumb|Strain hardening of PtW5 by cold working]]Fig. 2.38: Softening of PtW5 after annealing for 1hr after 80% cold working[[File:Softening of PtW5 after annealing.jpg|right|thumb|Softening of PtW5 after annealing for 1hr after 80% cold working]]Fig. 2.39: Strain hardening of Pd 99.99 by cold working[[File:Strain hardening of Pd-99 99by cold working.jpg|right|thumb|Strain hardening of Pd 99.99 by cold working]]Fig. 2.40: Strain hardening of PdCu15 by cold working[[File:Strain hardening of PdCu15 by cold working.jpg|right|thumb|Strain hardening of PdCu15 by cold working]]Fig. 2.41: Softening of PdCu15 after annealing for 0.5 hrs[[File:Softening of PdCu15 after annealing.jpg|right|thumb|Softening of PdCu15 after annealing for 0.5 hrs]]Fig. 2.42: Strain hardening of PdCu40 by cold working[[File:Strain hardening of PdCu40 by cold working.jpg|right|thumb|Strain hardening of PdCu40 by cold working]]Fig. 2.43: Softening of PdCu40 after annealing for 0.5 hrs after 80% cold working[[File:Softening of PdCu40 after annealing.jpg|right|thumb|Softening of PdCu40 Pt after annealing for 0.5 hrs after 80% cold working</caption>]]Fig. 2.44: Electrical resistivity p of PdCu alloys with and without an annealing step for forming an ordered phase[[File:Electrical resistivity p of PdCu alloys.jpg|right|thumb|Electrical resistivity p of PdCu alloys with and without an annealing step for forming an ordered phase]]</figure>

'''Table 2.9: Contact and Switching Properties of the Platinum Metals and their Alloys'''<table borderfigure id="1" cellspacing="0" style="border-collapsefig:collapseStrain_hardening_of_PtIr5_by_cold_working">[[File:Strain hardening of PtIr5 by cold working.jpg|left|thumb|<tr><tdcaption><p class="s11">MaterialFig. 2.33: Strain hardening of PtIr5 by cold working</pcaption>]]</td><tdfigure> <p classfigure id="s12fig:Softening_of_PtIr5_after_annealing_for_1_hr_after_different degrees_of_cold_working">Properties[[File:Softening of PtIr5 after annealing.jpg|left|thumb|</p></td></tr><tr><td><p class="s11">Pt</p></td><td><p class="s12">Very high corrosion resistance</p></td><td/></tr><tr><td><p class="s11"caption>Fig. 2.34: Softening of PtIr5 - 10after annealing for 1 hr after different degrees of cold working</pcaption>]]</tdfigure> <td><p classfigure id="s12fig:Strain_hardening_of_PtNi8_by_cold_working">Very high corrosion resistance, low contact resistance[[File:Strain hardening of PtNi8 by cold working.jpg|left|thumb|</pcaption>Fig. 2.35: Strain hardening of PtNi8 by cold working</tdcaption><td><p class="s12">High arc erosion resistance, high hardness]]</pfigure> </td></tr><tr><td><p classfigure id="s11fig:Softening_of_PtNi8_after_annealing_for_1_hr_after_80%_cold_working">PtRu10[[File:Softening of PtNi8 after annealing.jpg|left|thumb|</p></td><td><p class="s12">Very high corrosion resistance, low welding tendency</p></td><td><p class="s12">Low contact resistance, very</p><p class="s12">high hardness</p></td></tr><tr><td><p class="s11"caption>Fig. 2.36: Softening of PtNi8after annealing for 1 hr after 80% cold working</pcaption>]]</tdfigure> <td><p classfigure id="s12fig:Strain_hardening_of_PtW5_by_cold_working">Low material transfer tendency[[File:Strain hardening of PtW5 by cold working.jpg|left|thumb|</pcaption>Fig. 2.37: Strain hardening of PtW5 by cold working</tdcaption><td><p class="s12">Very high hardness]]</p></tdfigure> </tr><tr><td><p classfigure id="s11fig:Softening_of_PtW5_after_annealing_for_1_hr_after_80%_cold_working">[[File:Softening of PtW5after annealing.jpg|left|thumb|</pcaption>Fig. 2.38: Softening of PtW5 after annealing for 1 hr after 80% cold working</tdcaption><td><p class="s12">Low material transfer tendency]]</pfigure> </td><td><p classfigure id="s12fig:Strain_hardening_of_Pd_99.99_by_cold_working">High hardness</p>[[File:Strain hardening of Pd-99 99by cold working.jpg|left|thumb|</td></tr><tr><td><p class="s11"caption>Fig. 2.39: Strain hardening of Pd99.99 by cold working</pcaption>]]</td><tdfigure> <p classfigure id="s12fig:Strain_hardening_of_PdCu15_by_cold_working">Strong tendency to “Brown Powder” formation[[File:Strain hardening of PdCu15 by cold working.jpg|left|thumb|</pcaption>Fig. 2.40: Strain hardening of PdCu15 by cold working</tdcaption><td><p class="s12">Less arc erosion resistant than Pt]]</p></td></tr><trfigure> <td><p classfigure id="s11fig:Softening_of_PdCu15_after_annealing_for_0.5_hrs">[[File:Softening of PdCu15after annealing.jpg|left|thumb|</pcaption><p class="s11">PdCu40Softening of PdCu15 after annealing for 0.5 hrs</pcaption>]]</tdfigure> <td><p classfigure id="s12fig:Strain_hardening_of_PdCu40_by_cold_working">Tendency to “Brown Powder” formation[[File:Strain hardening of PdCu40 by cold working.jpg|left|thumb|</pcaption>Strain hardening of PdCu40 by cold working</tdcaption><td><p class="s12">Mostly resistant to material]]</pfigure> <p classfigure id="s12fig:Softening_of_PdCu40_after_annealing_for_0.5_hrs_after_80%_cold_working">transfer, high hardness[[File:Softening of PdCu40 after annealing.jpg|left|thumb|</pcaption>Softening of PdCu40 after annealing for 0.5 hrs after 80% cold working</tdcaption>]]</trfigure> <tr><td><p classfigure id="s11fig:Electrical_resistivity_p_of_PdCu_alloys">PdNi5</[[File:Electrical resistivity p>of PdCu alloys.jpg|left|thumb|</tdcaption><td><Electrical resistivity p class="s12">Strong tendency to “Brown Powder” formationof PdCu alloys with and without an annealing step for forming an ordered phase</pcaption>]]</tdfigure><td><p class="s12">Low welding tendency </p></tddiv></tr><tr><td><p div class="s11clear">Pd44Ag38Cu15</p><p class="s11">PtAuZn</p></td><td><p class="s12">High mechanical wear resistance</p></td><td><p class="s12">Standard material for sliding</p><p class="s12">contact brushes</p></td></tr></tablediv>